HP and Compaq Desktop PCs - Motherboard Specifications, P5LP-LE (Lithium)

Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

hp-support-head-portlet

Actions

Welcome to HP Customer Support

hp-contact-secondary-navigation-portlet

Actions

hp-hero-support-search

Actions

Examples: "LaserJet Pro P1102 paper jam", "EliteBook 840 G3 bios update"

hp-share-print-widget-portlet

Actions

Information

Information regarding recent vulnerabilities
HP is aware of the recent vulnerabilities commonly referred to as "Spectre" and "Meltdown". HP has published a security bulletin with patches for these issues and a list of impacted systems. We will continue to update the bulletin as more information becomes available and encourage customers to check the bulletin frequently.

hp-concentra-wrapper-portlet

Actions

HP and Compaq Desktop PCs - Motherboard Specifications, P5LP-LE (Lithium)

Motherboard specifications table

Motherboard layout and photos

Clearing the CMOS settings

Clearing the password settings

Motherboard specifications table

Part / Feature	Specification / Support
Motherboard description	Motherboard manufacturer's name: ASUS P5LP-LE HP/Compaq name: Lithium-UL8E
CPU/Processor	Socket: 775 Supports Pentium D (Smithfield) up to 3.2 GHz and Pentium4 (Prescott) up to 580 and 670
System bus	533 MHz, 800 MHz, 1066 MHz
Chipset	Northbridge: Intel 945P Southbridge: Intel I/O Controller Hub 7
BIOS features	The mainboard BIOS provides “Plug & Play” BIOS which detects the peripheral devices and expansion cards of the board automatically The mainboard provides a Desktop Management Interface (DMI) function which records your mainboard specifications
Form factor	Micro-ATX: 9.6 in X 9.6 in
Memory	Four 240-pin DDR2 DIMM sockets Supports PC2 4200 (533 MHz) and PC2 5300 (667 MHz) DDR2 DIMMs Supports 1.8v DDR2 SDRAM Maximum HP/Compaq approved memory is 4 GB* note: *Actual available memory may be less
Expansion slots	One PCI Express x16 graphics Three PCI
Video graphics	External only
Serial ATA	4 SATA connectors Each connector supports 1 serial ATA-150 disk drive
Onboard audio or audio card	Integrated Intel High Definition (TM) audio (Azalia) Realtek ALC 882 CODEC THX certification support 8-channels for Full Dolby 5.1/6.1/7.1 surround sound support with Dolby Pro Logic IIx
Onboard LAN	Intel 82562GT 10/100 Mbps Fast Ethernet
Back panel I/0	One PS/2 keyboard One PS/2 mouse One Parallel One IEEE 1394 One RJ-45 networking port Four USB 2.0 One coaxial SPDIF in One coaxial SPDIF out Six audio connectors: side speaker out, rear speaker out, center/subwoofer, line in, line out, and microphone
Internal connectors	One floppy port supports 1 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes One IDE One 24-pin ATX power One 4-pin ATX 12 V power Four serial ATA Four USB 2.0 ports on two connectors Two internal audio One front headphone and microphone One IEEE 1394a One CPU fan One system (chassis) fan

note:

Motherboard specifications are subject to change without notice.

Motherboard layout and photos

PS/2 mouse port

Parallel port

IEEE 1394a port (FireWire)

RJ-45 LAN port (network)

Side speaker out (gray) for 8-chennel audio configuration

Rear speaker out (black) for 4, 6, or 8-channel configuration

Center/Subwoofer port (yellow)

Audio line-in (light-blue)

Audio line-out/front speaker out (lime green)

Microphone (pink)

USB 2.0 ports

USB 2.0 ports

Coaxial S/PDIF out

Coaxial S/PDIF in

PS/2 Keyboard port

Clearing the CMOS settings

caution:

Do not change any jumper setting while the computer is on. Damage to the motherboard can result.

Clear RTC RAM (3-pin CLRTC)

This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords.

Turn off the PC and unplug the power cord.
Move the jumper cap from pins 1-2 (Normal) to pins 2-3 (Clear CMOS). Keep the cap on pins 2-3 for about 5 to 10 seconds, then move the cap back to pins 1-2.
Plug the power cord and turn on the PC.
Hold down the F1 key during the startup process and enter BIOS setup to re-enter/reset any custom BIOS settings.

caution:

Except when clearing the RTC RAM, never remove the cap from the default position. Removing the cap will cause system boot failure!

Clearing the password settings

caution:

Do not change any jumper setting while the computer is on. Damage to the motherboard can result.

The BIOS password is used to protect BIOS settings from unwanted changes. If you have forgotten your password you may disable password checking. To erase the BIOS password follow these steps:

Turn off the PC and unplug the power cord.
Move the jumper cap on jumper CLPWD to pins 1-2.
Plug the power cord and turn on the PC.
Hold down the F1 key during the boot process and enter BIOS setup to re-enter/reset any custom BIOS settings.
After changing or clearing the BIOS passwords, turn off the PC reset the jumper to pins 2-3