Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

hp-support-head-portlet

HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

hp-share-print-widget-portlet

Information

Need Windows 11 help?
Check the information on compatibility, upgrade, and available fixes from HP and Microsoft. Windows 11 Support Center

Feedback

hp-concentra-wrapper-portlet

Restore Wi-Fi setup mode on your HP printer

Many HP printers have a Wi-Fi setup mode that helps you connect your printer to a network. This mode is enabled for two hours during first-time printer setup. Restore Wi-Fi setup mode if the printer is not found during software setup or when the connection is lost.

Restore Wi-Fi setup mode on most HP printers

Use the control panel on your printer to restore Wi-Fi setup mode.

Printers with a touchscreen display

Use the touchscreen to restore Wi-Fi setup mode.

On the printer control panel, touch the Setup icon or Wireless icon .
Select Network setup or Settings, and then select Restore Network Settings.

Note:
Your control panel might look different than the following example, but the steps are the same.
If a confirmation prompt displays, touch Yes.
Wait 60 seconds until the Wireless light blinks blue.
Within two hours, return to the app or software to find and add your printer and complete the setup.

HP inkjet and ink tank printers without a touchscreen

Use the Cancel and Wireless buttons to restore Wi-Fi setup mode.

Press the Cancel button to ready the printer.
Press and hold the Wireless button and Cancel button simultaneously until the Power button blinks.

Note:
Your control panel might look different than the following example, but the steps are the same.
Wait 60 seconds until the Wireless light blinks blue.
Within two hours, return to the app or software to find and add your printer and complete the setup.

HP LaserJet printers without a touchscreen

Use the Cancel and Wireless buttons to restore Wi-Fi setup mode.

Press the Cancel button to ready the printer.
Press and hold the Wireless button until the Attention light blinks.

Note:
Your control panel might look different than the following example, but the steps are the same.
Wait 60 seconds until the Wireless light blinks blue.
Within two hours, return to the app or software to find and add your printer and complete the setup.

HP DeskJet 2700, 2700e, 2800, 2800e, 4100, 4100e, 4200, 4200e, Ultra 4800, 4900 printers

Use the Cancel and Wireless buttons to restore Wi-Fi setup mode.

Press the Cancel button to ready the printer.
Press and hold the Wireless button and the Cancel button at the same time for five seconds until the Power button starts blinking.

Note:
Your control panel might look different than the following example, but the steps are the same.
Wait until the blue Wireless button light blinks continuously.
Within two hours, return to the app or software to find and add your printer and complete the setup.

HP ENVY 6000, 6000e, 6400e, ENVY Pro 6400 printers

Use the Wireless button on the back of your printer to restore Wi-Fi setup mode.

On the back of the printer, press and hold the Wireless button for five seconds.

Note:
Your control panel might look different than the following example, but the steps are the same.
Wait for the Status light to turn purple.
Within two hours, return to the app or software to find and add your printer and complete the setup.

HP Laser 100, Color Laser 150 printers

Use the Cancel and Wireless buttons to restore Wi-Fi setup mode.

Press the Cancel button or Resume/Cancel button to ready the printer.
Press and hold the Wireless button for 20 seconds until the Attention and Power lights blink.

Note:
Your control panel might look different than the following example, but the steps are the same.
Wait 60 seconds.
Within two hours, return to the app or software to find and add your printer and complete the setup.

HP Laser MFP 130, Color Laser MFP 170 printers

Use the buttons on the printer control panel to restore Wi-Fi setup mode.

Press the Menu button .
Use the right arrow to navigate to Network, and then press OK.
Select Wi-Fi Default, and then press OK.

Note:
Your control panel might look different than the following example, but the steps are the same.
Wait 60 seconds.
Within two hours, return to the app or software to find and add your printer and complete the setup.

HP Laser NS, Neverstop Laser printers

Use the Wireless and Cancel buttons to restore Wi-Fi setup mode.

Press the Cancel button to ready the printer.
Press and hold the Wireless button and the Cancel button at the same time for three seconds until the printer restarts.

Note:
Your control panel might look different than the following example, but the steps are the same.
After the printer restarts, wait 60 seconds until the Wireless light blinks blue.
Within two hours, return to the app or software to find and add your printer and complete the setup.

HP LaserJet M109-M112 printers

Use the buttons on the printer control panel to restore Wi-Fi setup mode.

If the printer is in sleep mode (the Ready light is on but dim), press the Resume/Cancel button to wake up the printer.
Press and hold the Wireless button for more than 20 seconds or until the Attention light blinks.
Release the Wireless button .

The printer restarts and the Wireless light blinks.
Within two hours, return to the app or software to find and add your printer and complete the setup.

HP LaserJet MFP M139-M142 printers

Use the buttons on the printer control panel to restore Wi-Fi setup mode.

If the printer is in sleep mode (the Ready light is on but dim), press the Cancel button to wake up the printer.
Press and hold the Wireless button and the Cancel button for five seconds.
Wait for the printer to restart and for the Wireless light to blink.
Within two hours, return to the app or software to find and add your printer and complete the setup.

HP LaserJet M207-M212, MFP M232-M237 printers

Use the buttons on the printer control panel to restore Wi-Fi setup mode.

Press the Cancel button to ready the printer.
Press and hold the Information button for five seconds until the control panel buttons light.

Note:
Your control panel might look different than the following example, but the steps are the same.
Press the Wireless button and the Cancel button at the same time.
Wait 60 seconds until the Wireless button blinks blue continuously or the Status light pulses purple.
Within two hours, return to the app or software to find and add your printer and complete the setup.

HP LaserJet Tank 1020, 1500, 2500, MFP 1005, 1600, and 2600 printers

Use the buttons on the printer control panel to restore Wi-Fi setup mode.

Press the Cancel button to ready the printer.
Press and hold the Information button for five seconds until the control panel buttons light.

Note:
Your control panel might look different than the following example, but the steps are the same.
Press the Wireless button and the Cancel button simultaneously.
Wait 60 seconds until the Wireless button blinks blue continuously or the Status light pulses purple.
Within two hours, return to the app or software to find and add your printer and complete the setup.

HP Smart Tank 210 printers

Use the buttons on the printer control panel to restore Wi-Fi setup mode.

Press any button on the printer control panel to put it in a ready state.
Press and hold the Information button for five seconds until the control panel buttons light.
Press and hold the Wireless button and the Cancel button for five seconds until the Wi-Fi light blinks blue.
Within two hours, return to the app or software to find and add your printer and complete the setup.

HP Smart Tank 580, 5100 printers

Use the buttons on the printer control panel to restore Wi-Fi setup mode.

Press any button on the printer control panel to put it in a ready state.
Press and hold the Information button for five seconds until the control panel buttons light.
Press and hold the Wireless button and the Cancel button for five seconds until the Wi-Fi light blinks blue.
Within two hours, return to the app or software to find and add your printer and complete the setup.

HP Smart Tank 670, 720, 750, 7000, 7300 printers

Use the buttons on the printer control panel to restore Wi-Fi setup mode.

Press any button on the printer control panel to put it in a ready state.
Press and hold the Information button for five seconds until the control panel buttons light.
Press and hold the Wireless button and the Cancel button for five seconds until the Wi-Fi light blinks blue.
Within two hours, return to the app or software to find and add your printer and complete the setup.

HP Smart Tank 790, 7600 printers

Use the buttons on the printer control panel to restore Wi-Fi setup mode.

Press and hold the Wi-Fi button on the back of the printer for five seconds or until the control panel display shows a prompt.
On the prompt, touch OK to restore the network default settings. The status light blinks purple.
Within two hours, return to the app or software to find and add your printer and complete the setup.

HP Tango printers

Use the Wi-Fi button on the back of the printer to restore Wi-Fi setup mode.

On the back of the printer, press and hold the Wi-Fi button for five seconds.
Wait for the Status light to pulse blue.
Within two hours, return to the app or software to find and add your printer and complete the setup.

hp-feedback-input-portlet

hp-feedback-banner-portlet

hp-country-locator-portlet

Country/Region: Flag

Slovenia

hp-detect-load-my-device-portlet

hp-hero-support-search

Examples: "LaserJet Pro P1102 paper jam", "EliteBook 840 G3 bios update"

The Virtual Agent is currently unavailable. Please try again shortly.

Complementary Content