hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information

    Audio or sound issues? Try our automated HP Audio check!

    Information

    Fix and resolve Windows 10 update issue on HP Computer or Printer. Click here

    Information
    Create an HP account today!

     Connect with HP support faster, manage all of your devices in one place, view warranty information and more. Learn more​

hp-concentra-wrapper-portlet

Actions
Loading...

HP LaserJet M605, M606 - Removal and replacement: Control panel (M605x, M606x)

This document provides the procedures to remove and replace the control panel for the M605x and M606x models.

Mean time to repair: 10 minutes

Service level: Basic

Before performing service

Turn the printer power off

  • Disconnect the power cable.

    Warning:

    To avoid damage to the printer, turn the printer off, wait 30 seconds, and then remove the power cord before attempting to service the printer.

Use the table below to identify the correct part number for your printer. To order the part, go to www.hp.com/buy/parts.

Part information

Control panel (M605x, M606x) part number

E6B67-67914

Control panel ( M605x, M606x) with reversible screwdriver and instruction guide

Required tools

  • #2 Phillips screwdriver with a magnetic tip

  • Reversible small, flat-blade screwdriver

After performing service

Turn the printer power on

  • Connect the power cable.

  • Use the power switch to turn the power on.

Post service test

Make sure that the control panel display illuminates and the startup screens display as the printer initializes.

When the printer reaches the Ready state, make sure that the control panel buttons work correctly by scrolling through the control panel menus.

Remove the control panel

Follow these steps to remove the control panel.

  1. Tilt the control panel up.

    Tilt the control panel up

    Tilt the control panel up
  2. Before proceeding, take note of the location of the tabs (callout 1) on the control-panel screws cover. Use a small flat-blade screwdriver to release these tabs at the top of the cover.

    Release tabs

    Release tabs
  3. Rotate the cover away from the control panel base to remove it.

    Rotate cover away

    Rotate cover away
  4. Remove two screws (callout 1).

    Remove two screws

    Remove two screws
  5. Rotate the control-panel base toward the front of the printer.

    Rotate the control panel base

    Rotate the control panel base
  6. Disconnect one USB cable (callout 1), and one connector (callout 2).

    Disconnect connectors

    Disconnect connectors
  7. Remove the control panel.

    Remove the control panel

    Remove the control panel

Unpack the replacement assembly

Follow these steps to unpack the replacement assembly.

  1. Dispose of the defective part.

    Note:

    HP recommends responsible disposal of the defective part.

    http://www8.hp.com/us/en/hp-information/environment/product-recycling.html

  2. Unpack the replacement part from the packaging.

    CAUTION:

    Some parts are sensitive to electrostatic discharge (ESD). Always perform service work at an ESD-protected workstation or mat. If an ESD workstation or mat is not available, touch the sheet-metal chassis to provide a static ground before touching an ESD-sensitive assembly. Protect the ESD-sensitive assemblies by placing them in ESD pouches when they are out of the printer.

    Important:

    Make sure that all of the shipping materials (for example shipping tape) are removed from the replacement part prior to installation.

    Note:

    If the replacement part is a roller or pad, avoid touching the spongy part of it. Skin oils on the roller or pad can cause paper pickup and/or print-quality problems. HP recommends using disposable gloves when handling rollers or pads or washing your hands before touching rollers or pads.

  3. To install an assembly, reverse the removal steps.

    Note:

    When applicable, special installation instructions are provided for an assembly at the end of the removal procedure. Always completely read the removal instructions and follow all special installation instructions.

Install the control panel

Follow these steps to install the control panel.

  1. Open the replacement control panel, and then position the tabs (callout 1) on the control panel in the slots (callout 2) in the printer.

    Reinstall the control panel

    Reinstall the control panel
  2. Connect one USB cable (callout 1), and one connector (callout 2).

    Connect connectors

    Connect connectors
  3. Rotate the control-panel base down onto the printer.

    Rotate the control-panel base down

    Rotate the control-panel base down
  4. Install two screws (callout 1).

    Install two screws

    Install two screws
  5. Position the screw cover mounting feet into the slots in the top cover (callout 1), and then rotate the cover toward the control-panel base (callout 2) to install it.

    Note:

    Make sure that the tabs on the cover (callout 3) snap into place.

    Install screw cover

    Install screw cover

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Slovenia

hp-detect-load-my-device-portlet

Actions
Loading...