hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information
    Need Windows 11 help?

    Check documents and videos on compatibility, FAQs, upgrade information and available fixes. Windows 11 Support Center

  • Feedback

hp-concentra-wrapper-portlet

Actions
Loading...

HP PageWide Managed MFP - Load paper to tandem Trays 2 and 3 (E77660zts, P77440dn models only)

Introduction

  caution:
Do not extend more than one paper tray at a time. Do not use paper tray as a step. Keep hands out of paper trays when closing. All trays must be closed when moving the printer.
The following information describes how to load paper into tandem Trays 2 and 3. These trays hold up to 550 sheets of 75 g/m2 paper.
  1. Open the tray.
    Figure : Open the tray
  2. Adjust the paper-length and paper-width guides by squeezing the blue adjustment latches and sliding the guides to the size of the paper being used.
    Figure : Adjust the guides
  3. Load paper into the tray, and then close the length and width paper guides against the stack. Check the paper to verify that the guides touch the stack, but do not bend it.
    Figure : Load paper
  4. To prevent jams, do not overfill the tray. Be sure that the top of the stack is below the tray full indicator.
    Figure : Check the stack height
  5. Close the tray.
    Figure : Close the tray
  6. Repeat these steps for the other tray.

Use alternative letterhead mode

Use the Alternative Letterhead Mode feature to load letterhead or preprinted paper into the tray the same way for all jobs, whether printing to one side of the sheet of paper or to both sides. When using this mode, load paper as for automatic duplex printing.
To use the feature, enable it by using the printer control-panel menus.

Enable Alternative Letterhead Mode by using the printer control-panel menus

  1. From the Home screen on the printer control panel, open the Settings menu.
  2. Open the following menus:
    • Copy/Print or Print
    • Manage Trays
    • Alternative Letterhead Mode
  3. Select On.

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Slovenia

hp-detect-load-my-device-portlet

Actions
Loading...