HP Color LaserJet Pro M252, M277 Printers - Replacing Toner Cartridges

note:

The printer in these images might not look exactly like your printer, but the steps are the same.

1. Open the front door.
   Figure : Opening the front door

   
2. Grasp the blue handle on the toner cartridge drawer, and thenpull out the drawer.
   Figure : Pulling out the toner cartridge drawer

   
3. Grasp the handle on the toner cartridge, and then pull thetoner cartridge straight up to remove it.
   Figure : Removing the toner cartridge

   
4. Remove the new toner cartridge package from the box, andthen pull the release tab on the packaging.
   Figure : Pulling the release tab on the packaging

   
5. Remove the toner cartridge.

     caution:

   Do not touch the imaging drum on the bottom of the tonercartridge. Fingerprints on the imaging drum can cause print qualityproblems.

   Figure : Do not touch the imaging drum

   

   Figure : Removing the toner cartridge from the packaging

   
6. Grasp both ends of the toner cartridge, and then gently rock the toner cartridge back and forth to distribute the toner.
   Figure : Gently rocking the toner cartridge back and forth

   
7. Insert the new toner cartridge into the drawer. Make sure thatthe color chip on the cartridge matches the color chip on thedrawer.
   Figure : Inserting the toner cartridge into the printer

   
8. Push the toner cartridge drawer into the printer.
   Figure : Pushing the toner cartridge drawer into the printer

   
9. Close the front door.
   Figure : Closing the toner cartridge drawer