Your printer is a color inkjet printer designed for printing high-quality images on flexible substrates from 914 mm to 2.64 m wide (LX600), or to 3.20 m wide (LX800). Some major features of the printer are shown below:
-
LX600: Printing speeds of up to 79 m²/h for outdoor-quality prints, or 34 m²/h for indoor-quality prints
-
LX800: Printing speeds of up to 133 m²/h for outdoor-quality prints, or 45 m²/h for indoor-quality prints
-
Environmentally friendly, odorless, aqueous latex inks in six colors
-
No hazardous waste
-
Three-liter ink cartridges which can be changed while printing
-
Print on a wide range of substrates—including most low-cost, uncoated, solvent-compatible substrates, and textile or porous substrates without liner
-
Durable prints with outdoor display permanence up to three years unlaminated, five years laminated
-
Accurate and consistent color reproduction with automatic color calibration (built-in spectrophotometer)
-
The HP Internal Print Server, see Start the HP Internal Print Server, provides an easy-to-use interface including:
-
Print job management
-
Full printer status information
-
Printer alerts
-
Printer calibrations and adjustments
-
Management and installation of substrate presets
-
Printer firmware upgrades
-
Access to the online HP Printing Knowledge Center
-