hp-support-head-portlet

Actions
Loading...

Welcome to HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information
    Important Print Security Update

    HP was recently made aware of a vulnerability in certain inkjet printers by a third-party researcher. HP has updates available for download to address the vulnerability. Details and more information are available in the Security Bulletin

hp-concentra-wrapper-portlet

Actions
Loading...

HP Compaq 8510w Mobile Workstation - Removing and Replacing the Bluetooth Module

Introduction
This document is provided to assist in removing and replacing the Bluetooth module for the HP Compaq 8510w Mobile Workstation.
Minimum skill level
The End-User should possess product-specific knowledge and technical skill on how to service the system, and have familiarity with the operating system.
Tools required
P0 Phillips-head screwdriver
P1 Phillips-head screwdriver
Parts required
  note:
Part numbers are subject to change.
The replacement part number will vary depending on the Bluetooth module that is being replaced. If a part is listed as "Yes" under "Requires Return" then the defective part needs to be returned to HP. Click here for more information on returning parts to HP.
Description
Part Number
Requires Return
Bluetooth module - Bluetooth specification v2.0 compliant
398393-002 (Modified)
No
Embedded Bluetooth module - Does not include cable (For use in Japan and Asia Pacific regions)
450066-001 (Modified)
No
Cable kit - Includes cables for Bluetooth module, RJ-11 connector, microphone, and module module
452198-001 (Modified)
No
  note:
For customers in countries/regions with RoHS legislation* (e.g. EU, China, etc.) restricting the use of hazardous substances in electrical equipment. The use of the Original Spare part is regulated by RoHS legislation. If your unit contains a part that is labelled with the Modified Spare number, the Modified Spare must be ordered as the replacement part. If your unit contains a part that is labelled with the Original Spare number, please order the Original Spare as the replacement part. In this case either the Original Spare or the Modified Spare may be shipped which will not affect performance or functionality of the unit.
Summary of instructions
To view a video demonstrating the procedure for removing the Bluetooth module, click on the link below. Or use the product video listing on the HP Services Media Library (Click here to go to HP Services Media Library), then select Bluetooth module from the menu on the upper left hand side of the screen.
Click here to view the Bluetooth module removal video (Right-click on the link to open in a new window/tab).
Bluetooth module removal
  1. Review the safety considerations before performing the steps listed below by clicking on the following link:
      caution:
    Failure to comply with the precautions could result in damage to your product or loss of data.
  2. Grasp the Mylar tab and slide the Bluetooth module out of the slot in the Hard disk drive bay.
  3. Disconnect the Bluetooth module cable from the Bluetooth module.
  4. Place the Bluetooth module in a static dissipative bag.
Bluetooth module replacement
  1. Remove the Bluetooth module from the static dissipative bag.
  2. Reconnect the Bluetooth module cable to the Bluetooth module.
  3. Slide the Bluetooth module into the slot in the hard disk drive bay.

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Slovenia

hp-detect-load-my-device-portlet

Actions
Loading...