13.B9 jam error in fuser output

Use the following procedure to check for paper in all possible jam locations in the fuser area.

Recommended action for customers

When a jam occurs, the control panel displays a message and an animation that assists in clearing the jam.

• 13.B9.yz Jam in rear door

y = jam type (A, C, or D)

z = paper type that is being printer on. This can be 0-9 or A-F.

CAUTION:

The fuser can be hot while the printer is in use. Wait for the fuser to cool before handling it.

1. Open the rear door.

   

2. Gently pull out any jammed paper from the rollers in the rear door area.

   

3. Close the rear door.

   

4. If the error persists, ensure the type and quality of the paper being used meets the HP specifications for the printer.

5. If the error persists, contact your HP-authorized service or support provider, or contact customer support at www.hp.com/go/contactHP.