hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information

    Audio or sound issues? Try our automated HP Audio check!

    Information

    Fix and resolve Windows 10 update issue on HP Computer or Printer. Click here

    Information
    Create an HP account today!

     Connect with HP support faster, manage all of your devices in one place, view warranty information and more. Learn more​

hp-concentra-wrapper-portlet

Actions
Loading...

HP Color LaserJet Enterprise M652, M653, Managed E65050, E65060, E65150, E65160 and HP Color LaserJet Enterprise MFP M681, M682, Managed MFP E67550, E67560, E67650, E67660 - Install accessory: Jetdirect USB wireless print server with NFC

Learn how to install the Jetdirect USB wireless print server with NFC.

Mean time to repair: 5 minutes

Service level: Basic

Important:

When applicable, special installation instructions are provided for an assembly at the end of the removal procedure. Always completely read the removal instructions and follow all special installation instructions.

Before performing service

  • Turn the printer power off.

  • Disconnect the power cable.

    Warning:

    To avoid damage to the printer, turn the printer off, wait 30 seconds, and then remove the power cable before attempting to service the printer.

Use the table below to identify the correct part number for your printer. To order the part, go to www.hp.com/buy/parts

Part information

Part number

Part description

J8030-61001

Jetdirect USB wireless print server with NFC

Required tools

  • Small, flat-blade screwdriver

After performing service

Turn the printer power on

  • Connect the power cable.

  • Use the power switch to turn the power on.

Post service test

Verify that the host computer can successfully access the printer through the network and that the NFC functionality works correctly.

Remove the accessory from its package

Follow these steps to remove the accessory from its package.

  1. Save all packaging for recycling.

  2. For complete information about HP recycling programs, go to http://www8.hp.com/us/en/hp-information/environment/product-recycling.html.

Install the Jetdirect USB wireless print server with NFC

Follow these steps to install the Jetdirect USB wireless print server with NFC.

  1. To install the print server in the hardware integration pocket (HIP), do the following:

    1. Locate the hardware integration pocket (HIP) (callout 1).

      Locate the HIP

      Locate the HIP
    2. Using a small, flat-blade screwdriver along either short edge, gently pry the HIP cover off.

      Remove the HIP cover

      Remove the HIP cover
    3. Connect the white connector on the short USB cable provided in the kit to the print server.

      Connect the USB cable to the print server

      Connect the USB cable to the print server
    4. Connect the USB connector on the short USB cable to the socket in the printer’s HIP.

      Connect the USB cable to the printer

      Connect the USB cable to the printer
    5. Insert the hook-shaped clips of print server into the HIP recess.

      Install the clips

      Install the clips
    6. Gently push the print server onto the rounded clips so that it is held securely in place in the HIP.

      Install the print server

      Install the print server
  2. To install the print server on the outside of the printer, do the following:

    1. Connect the white connector on the long USB cable provided in the kit to the print server.

      Connect the USB cable to the print server

      Connect the USB cable to the print server
    2. Push the long USB cable into the slot on the accessory cover provided in the kit out (callout 1), and then insert the hook-shaped clips of the print server into the accessory cover (callout 2). Press down to firmly attach the print server to the accessory cover (callout 3).

      Attach the accessory cover

      Attach the accessory cover
    3. Attach the fastener strips provided in the kit to the bottom of the print server (callout 1). Remove the backing paper in order to attach the bottom set of fastener strips to the top of the printer (callout 2). Place the print server on the printer (callout 3). Connect the USB connector on the long USB cable to the USB accessory port on the printer (callout 4).

      Attach the print server to the printer

      Attach the print server to the printer

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Singapore

hp-detect-load-my-device-portlet

Actions
Loading...