hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP LaserJet Managed MFP E72525-E72535, E77822-E77830, E78323-E78330 - Load paper in the HCI tray

Introduction

The following information describes how to load paper into the high-capacity input (HCI) tray.

Load paper in the HCI tray

In addition to the instructions provided in this document, you can view the following video of how to load paper in the HCI tray:
note:
The printer models referenced in this video might be different from your printer model, but the steps to load paper in the HCI tray are the same.
  1. Open the HCI tray.
    Figure : Open the HCI tray
  2. Load a stack of paper into the right side of the tray.
    note:
    You can also load paper into the left side of the tray.
    IMPORTANT: Before loading paper in the left side of the tray, the paper transport guide must be positioned all the way to the left.
    Figure : Load paper into the tray
    note:
    Only load paper sizes that the tray supports: A4 or Letter. If you load unsupported paper sizes, it can trip the paper retainer on the left side of the tray, and paper feed or paper jam issues are likely to occur.
    Figure : Do not load unsupported paper sizes
  3. Close the HCI tray.

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Singapore

hp-detect-load-my-device-portlet

Actions
Loading...