hp-support-head-portlet

Actions
Loading...

Welcome to HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP LaserJet Enterprise M506, MFP M527 - Install the optional cabinet stand

Install the optional cabinet stand
This document provides the procedure to install the optional cabinet stand for the HP LaserJet Enterprise M506 and HP LaserJet Enterprise MFP M527 printers.
Figure : Cabinet stand
Allow enough space around the printer to open all doors and trays.
  1. Press the power button to turn off the printer.
    Figure : Turn off the printer
  2. Disconnect the power cord and USB or network cable.
    M527 models only: Disconnect the phone cord for the fax.
    Figure : Disconnect the cables
  3. Open the 550-sheet paper feeder.
      caution:
    Do not extend more than one paper tray at a time.
    Figure : Open the tray
  4. Lift the lever to unlock the paper feeder.
      note:
    If multiple paper feeders are installed, repeat steps 4 through 6 to unlock all of the paper feeders.
    Figure : Unlock the tray
  5. Walk to the rear of the printer.
    Figure : Walk to the rear of the printer
  6. Press the lever toward the rear of the printer to finish unlocking the paper feeder.
    Figure : Unlock the feeder
  7. Place all paper feeders on the cabinet stand, and then place the printer on the paper feeders and cabinet stand.
      caution:
    HP recommends that two people move the printer.
    Figure : Place the printer on the cabinet stand
  8. Open the door of the cabinet stand.
    Figure : Open the door
  9. Press down on the lever to lock the cabinet stand.
    Figure : Lock the cabinet stand
  10. Close the door of the cabinet stand.
    Figure : Close the door
  11. Open the tray.
    Figure : Open the tray
  12. Press down on the lever to lock the feeder.
      note:
    If multiple paper feeders are installed, repeat this step to lock all of the feeders.
    Figure : Lock the tray
  13. Walk to the rear of the printer.
    Figure : Walk to the rear of the printer
  14. Press the lever on the back of the cabinet toward the front of the printer.
    Figure : Lock the cabinet
  15. Press the lever under the back handle toward the front of the printer to finish locking the feeder and cabinet.
    Figure : Lock the feeder
  16. Lock the wheel of the cabinet stand.
    Figure : Lock the wheels
  17. Connect the power cable and the USB or network cable.
    M527 models only: Connect the phone cord for the fax.
    Figure : Connect the cables
  18. Press the power button to turn on the printer.
    Figure : Turn on the printer

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country: Flag Singapore

hp-detect-load-my-device-portlet

Actions
Loading...