## hp-support-head-portlet

Actions- ${title}

Loading...

HP Customer Support - Knowledge Base

## hp-contact-secondary-navigation-portlet

Actions- ${title}

Loading...

## hp-share-print-widget-portlet

Actions- ${title}

Loading...

## hp-concentra-wrapper-portlet

Actions- ${title}

Loading...

# HP 50g Graphing Calculator - Working with Parametric Plots

## Plotting on the HP 50g

The HP 50g calculator provides a host of plots to allow the user to visualize data or relationships between them. The WHITE shifted
functions of the top row of keys on the HP 50g allow access to many of the input forms where plotting specifications may be entered.

## Parametric plots

Parametric plots can be thought of as a plot of complex function of parameter T plotted over the complex plane. The (x,y) vector
points may be used to draw the figures. Alternatively, parametric plots can be thought of as a system of two equations X=X(T) and
Y=Y(T), where the Y(T) represents the imaginary part. Parametric plots can also be used to plot vertically, as an example shows.

## The 2D/3D (PLOT SETUP) form

The 2D/3D (PLOT SETUP) Form is accessed from the LEFT shifted function of the key by pressing and

**holding**down and then pressing to access . When pressed, a form is displayed with a number of choices related to plotting**Figure : Displaying plot setup form**

The first choice deals with choosing the plot type. The selections for plot type are displayed by pressing , which has the label right above it. The plot types include plotting functions, polar plots, parametric plots, differential equation plots, conic plots,
truth plots, histograms, bar charts, scatter charts, slopefield charts, fast 3D charts, wireframe plots, Ps-contour plots, Y-slice plots,
gridmap plots, and Pr-surface plots. A CHOOSE Box appears as shown below.

**Figure : Displaying the choose box**

The Plot Setup form also allows the user to specify the equation being plotted if the cursor is placed on the EQ: field and the menu label is pressed – this invokes the EquationWriter to allow for the construction of the equation to be plotted. The form also
allows the angle measure used and the independent variable to be specified.

note:In addition, several check boxes that are used to indicate whether the plotted points should be automatically connected together by the calculator and the horizontal and vertical tick marks used for the graph. The form also allows for the plotting of more than one function at a time.The default is often 'X', but for parametric plots, this will be changed to 't').

## The Y= form

The Y= form provides another way to enter your equation or function to plot. Press and

**hold**down and then press , which is . The following form appears:**Figure : Displaying the Y form**

Press with a label above it, to add a function using the equation writer.

## The WIN form

The WIN form allows for the plot window specifications to be entered and changed. The lower and upper horizontal and vertical
values displayed on the graph can be changed. The lower and upper value for the independent variable can also be specified on this
form. To open the WIN form, press and hold down and press , which is . The following form appears:

**Figure : Displaying the WIN form**

The menu label will discard the results of a previous plot and the menu label will begin the plot.

## Examples of parametric plotting

### Example 1

Plot the equation below as a parametric plot

3 SIN( 3t ) + 2 SIN( 4t ) I

### Solution

(do not forget to press AND hold the key while pressing the key)

**Figure : Displaying the plot setup form**

**Figure : Entering the equation to be plotted**

**Figure : Entering the equation to be plotted**

**Figure : Entering the plot window specifications**

### Answer

The plot is displayed. A curve called lissajous figure is drawn.

**Figure : Displaying the plot**

To get out of the Plot Environment press

### Example 2

Plot the equation below as a parametric plot.

(2*SIN(T),COS(T))

### Solution

(do not forget to press AND hold the key while pressing the key)

**Figure : Entering the equation to be plotted**

note:If the calculator is in real mode then the following dialog box might appear

**Figure : Checking the dialog box to set the mode**

If this happens, just answer YES by pressing and proceed.

**Figure : Entering the plot window specifications**

### Answer

The plot is displayed. An ellipse is drawn

**Figure : Displaying the plot of the function**

To get out of the Plot Environment press

### Example 3

Plot the SIN(T) equation as a vertical plot

### Solution

(do not forget to press AND hold the key while pressing the key)

**Figure : Entering the equation in the plot setup**

If the calculator is in real mode then a question asking if complex mode should be turned on may be displayed.
Answer YES by pressing and proceed.

**Figure : Entering the plot window specifications**

### Answer

The plot is displayed. A nice, vertical sine curve is drawn.

**Figure : Displaying the plot of the function**

To get out of the Plot Environment press

## hp-feedback-input-portlet

Actions- ${title}

Loading...

## hp-feedback-banner-portlet

Actions- ${title}

Loading...

## hp-country-locator-portlet

Actions- ${title}

Loading...

Country/Region:
Singapore

## hp-detect-load-my-device-portlet

Actions- ${title}

Loading...

## hp-hero-support-search

Actions- ${title}

Loading...