solution Contentsolution Content

HP ProBook x360 435 G7 Notebook PC - Components

Your computer features top-rated components. This chapter provides details about your components, where they are located, and how they work.

Right side

Use the illustration and table to identify the components on the right side of the computer.
Identifying the right-side components
Right-side components and their descriptions
Component
Description
(1)
microSD™ memory card reader
Reads optional memory cards that enable you to store, manage, share, or access information.
To insert a card:
  1. Hold the card label-side up, with connectors facing the computer.
  2. Insert the card into the memory card reader, and then press in on the card until it is firmly seated.
To remove a card:
  1. Press in on the card, and then remove it from the memory card reader.
(2)
Audio-out (headphone)/Audio-in (microphone) combo jack
Connects optional powered stereo speakers, headphones, earbuds, a headset, or a television audio cable. Also connects an optional headset microphone. This jack does not support optional standalone microphones.
  varning!
To reduce the risk of personal injury, adjust the volume before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety, and Environmental Notices.
To access this guide:
  1. Type HP Documentation in the taskbar search box, and then select HP Documentation.
obs!
When a device is connected to the jack, the computer speakers are disabled.
(3)
HDMI port
Connects an optional video or audio device, such as a high-definition television, any compatible digital or audio component, or a high-speed High-Definition Multimedia Interface (HDMI) device.
(4)
USB SuperSpeed port
Connects a USB device, provides high-speed data transfer, and (for select products) charges small devices when the computer is on or in Sleep mode.
(5)
USB Type-C SuperSpeed port and DisplayPort™ connector
Connects a USB device, provides high-speed data transfer, and (for select products) charges small devices when the computer is on or in Sleep mode.
obs!
Cables, adapters, or both (purchased separately) might be required.
- and -
Connects a DisplayPort device that has a USB Type-C connector, providing display output.
(6)
Battery light
When AC power is connected:
  • White: The battery charge is greater than 90%.
  • Amber: The battery charge is from 0 to 90%.
  • Off: The battery is not charging.
When AC power is disconnected (battery not charging):
  • Blinking amber: The battery has reached a low battery level. When the battery has reached a critical battery level, the battery light begins blinking rapidly.
  • Off: The battery is not charging.
(7)
Power connector
Connects an AC adapter.

Left side

Use the illustration and table to identify the components on the left side of the computer.
Identifying the left-side components
Left-side components and their descriptions
Component
Description
(1)
Security cable slot
Attaches an optional security cable to the computer.
obs!
The security cable is designed to act as a deterrent, but it might not prevent the computer from being mishandled or stolen.
(2)
USB SuperSpeed port with HP Sleep and Charge
Connects a USB device, provides high-speed data transfer, and charges small devices, even when the computer is off.
(3)
Vent
Enables airflow to cool internal components.
obs!
The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation.

Display

The computer display can include essential components such as speakers, antennas, cameras, and microphones.
Identifying the display components
Display components and their descriptions
Component
Description
(1)
WLAN antennas* (select products only)
Send and receive wireless signals to communicate with wireless local area networks (WLANs).
(2)
Internal microphones
Record sound.
(3)
Camera light(s)
On: One or more cameras are in use.
(4)
Camera(s)
Allow(s) you to video chat, record video, and record still images. Some cameras also allow a facial recognition logon to Windows, instead of a password logon.
obs!
Camera functions vary depending on the camera hardware and software installed on your product.
(5)
Camera privacy cover
By default, the camera lens is uncovered, but you can slide the camera privacy cover to block the camera's view. To use the camera, slide the camera privacy cover in the opposite direction to reveal the lens.
obs!
If you have both front-facing and rear-facing cameras, when one camera lens is revealed and ready to use, the other is concealed.
*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennas free from obstructions.
For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region.
To access this guide:
  1. Type HP Documentation in the taskbar search box, and then select HP Documentation.

Keyboard area

Keyboards can vary by language.

Touchpad components

Identify the touchpad components.
To adjust touchpad settings and gestures, or to turn off the touchpad:
  1. Type touchpad settings in the taskbar search box, and then press enter.
  2. Choose a setting.
To turn on the touchpad:
  1. Type touchpad settings in the taskbar search box, and then press enter.
  2. Using an external mouse, click the touchpad button.
    - or -
  1. Press the Tab key repeatedly until the pointer rests on the touchpad button. Then press the spacebar to select the button.
Identifying the touchpad
Touchpad components and their descriptions
Component
Description
Touchpad zone
Reads your finger gestures to move the pointer or activate items on the screen.

Lights

Identify the lights on the computer.
Identifying the lights
Lights and their descriptions
Component
Description
(1)
Caps lock light
On: Caps lock is on, which switches the key input to all capital letters.
(2)
Mute light
  • On: Computer sound is off.
  • Off: Computer sound is on.
(3)
Microphone mute light
  • On: The microphone is off.
  • Off: The microphone is on.
(4)
Power light
  • On: The computer is on.
  • Blinking (select products only): The computer is in the Sleep state, a power-saving state. The computer shuts off power to the display and other unnecessary components.
  • Off: Depending on your computer model, the computer is off, in Hibernation, or in Sleep. Hibernation is the power-saving state that uses the least amount of power.
(5)
Fn lock light
On: The fn key is locked.

Button, speakers, and fingerprint reader

Identify the computer button, speakers, and fingerprint reader.
Fingerprint readers can be located on the touchpad, on a side panel of the computer, or on the top cover below the keyboard.
obs!
To verify that your computer supports fingerprint reader sign-in, type Sign-in options in the taskbar search box and follow the on-screen instructions. If Fingerprint reader is not listed as an option, then your notebook does not include a fingerprint reader.
Identifying the button, vent, speakers, and fingerprint reader
Button, speakers, and fingerprint reader and their descriptions
Component
Description
(1)
Speakers
Produce sound
(2)
Power button
  • When the computer is off, press the button briefly to turn on the computer.
  • When the computer is on, press the button briefly to initiate Sleep.
  • When the computer is in the Sleep state, press the button briefly to exit Sleep (select products only).
  • When the computer is in Hibernation, press the button briefly to exit Hibernation.
obs!
Pressing and holding down the power button results in the loss of unsaved information.
If the computer has stopped responding and shutdown procedures are ineffective, press and hold the power button down for at least 4 seconds to turn off the computer.
To learn more about your power settings, see your power options:
  1. Right-click the Power icon, and then select Power Options.
(3)
Fingerprint reader (select products only)
Allows a fingerprint logon to Windows, instead of a password logon.
  1. Swipe down across the fingerprint reader.
    obs!
    To prevent fingerprint logon issues, be sure when you register your fingerprint that all sides of your finger are registered by the fingerprint reader.

Special keys

Identify the special keys.
Identifying the special keys
Special keys and their descriptions
Component
Description
(1)
esc key
Displays system information when pressed in combination with the fn key.
(2)
fn key
Executes frequently used system functions when pressed in combination with another key. Such key combinations are called hot keys.
(3)
Windows key
Opens the Start menu.
obs!
Pressing the Windows key again will close the Start menu.
(4)
Action keys
Execute frequently used system functions.
(5)
Power button
  • When the computer is off, press the button briefly to turn on the computer.
  • When the computer is on, press the button briefly to initiate Sleep.
  • When the computer is in the Sleep state, press the button briefly to exit Sleep (select products only).
  • When the computer is in Hibernation, press the button briefly to exit Hibernation.
obs!
Pressing and holding down the power button results in the loss of unsaved information.
If the computer has stopped responding and shutdown procedures are ineffective, press and hold the power button down for at least 4 seconds to turn off the computer.
To learn more about your power settings, see your power options:
  1. Right-click the Power icon, and then select Power Options.

Hot keys (select products only)

Identify the hot keys.
A hot key is the combination of the fn key and another key.
To use a hot key:
  1. Press the fn key, and then press one of the keys listed in the following table.
Hot keys and their descriptions
Key
Description
C
Turns on scroll lock.
E
Turns on the insert function.
R
Breaks the operation.
S
Sends a programing query.
W
Pauses the operation.

Bottom

Identify the bottom component.
Identifying the bottom component
Bottom component and its description
Component
Description
Vent
Enables airflow to cool internal components.
obs!
The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation.

Labels

The labels affixed to the computer provide information that you might need when you troubleshoot system problems or travel internationally with the computer. Labels can be in paper form or imprinted on the product.
obs!
Check the following locations for the labels described in this section: the bottom of the computer, inside the battery bay, under the service door, on the back of the display, or on the bottom of a tablet kickstand.
  • Service label—Provides important information to identify your computer. When contacting support, you might be asked for the serial number, the product number, or the model number. Locate this information before you contact support.
    Your service label information order may vary by country and might not include the wording "Model" due to the country regulation.
    Identifying the service label
    Service label components
    Component
    (1)
    HP product name
    (2)
    Product ID
    (3)
    Serial number
    (4)
    Warranty period
  • Regulatory label(s)—Provide(s) regulatory information about the computer.
  • Wireless certification label(s)—Provide(s) information about optional wireless devices and the approval markings for the countries or regions in which the devices have been approved for use.


Ytterligare supportalternativ