Error:

Javascript har avaktiverats i webbläsaren. Sidan kräver Javascript. Ändra webbläsarinställningarna så att Javascript kan köras. Mer information finns i dokumentationen till webbläsaren.

hp-support-head-portlet

Åtgärder

Läser in...

HP:s kundsupport - kunskapsdatabas

hp-contact-secondary-navigation-portlet

Åtgärder

Läser in...

hp-share-print-widget-portlet

Åtgärder

Läser in...

Information

Lär dig hur du uppgraderar till Windows 11
Handbok för uppgradering till Windows 11

Respons

hp-concentra-wrapper-portlet

Åtgärder

Läser in...

HP Neverstop Laser MFP 1200 - Loading Paper, Envelopes

This document is for HP Neverstop Laser MFP 1200a, 1200n, 1200nw, 1200w, 1201n, 1202nw, and 1202w printers.

Load paper or envelopes in the input tray.

Load plain paper

Load a stack of paper into the input tray.

Remove the input tray cover.
Slide out the paper guides as far as possible.
Flex or fan the edge of the paper stack to separate the pages.
Insert a stack paper (no more than 150 sheets) into the input tray with the top forward and the side to be printed on facing up.
Slide in the paper guides until they touch the edges of the paper.

varning!
To prevent paper jams, do not overfill the tray. Make sure the top of the stack is below the paper fill guide inside the printer.
Replace the input tray cover.
Pull out the output bin extension.

Your printer is now ready to print on plain paper. Before printing, make sure to select the correct paper size and settings for your print job.

Load envelopes

Load one envelope at a time in the input tray.

Remove the input tray cover.
Slide out the paper guides as far as possible.
Remove any paper from the input tray.
Insert one envelope into the input tray with the short postage end toward the back of the tray and the side to be printed on facing up.
Slide the paper guides to the edges of the envelope.
Slide the input tray cover onto the tray.
Pull out the output bin extension.