Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

hp-support-head-portlet

Actions

HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions

hp-share-print-widget-portlet

Actions

Information

Need Windows 11 help?
Check the information on compatibility, upgrade, and available fixes from HP and Microsoft. Windows 11 Support Center

Feedback

hp-concentra-wrapper-portlet

Actions

HP and Compaq Desktop PCs - Motherboard Specifications, (JasmineR)

Figure : The JasmineR motherboard

Motherboard description

Manufacturer: MSI
Manufacturer name: MS-7778
HP/Compaq name: JasmineR
SSID: 2AE0

Form Factor

uATX
Dimensions: 24.4 cm (9.6 in) x 24.4 cm (9.6 in)

Chipset

AMD A75 FCH

Front-side bus speed

UMI (Unified Media Interface)
4 lanes, 5 GT/s per lane

Processor upgrade information

TDP: up to 100 W
Socket type: FM2

Motherboard supports the following processor upgrades:

Processor	TDP
AMD Sempron 240 (Trinity) Dual Core	up to 65 W
AMD A4-5300 (Trinity) 65W Dual Core	up to 65 W
AMD A6-5400K (Trinity) Dual Core	up to 65 W
AMD A8-5500 (Trinity) Quad Core	up to 65 W
AMD A8-5600K (Trinity) Quad Core	up to 100 W
AMD A10-5700 (Trinity) Quad Core	up to 65 W
AMD A10-5800K (Trinity) Quad Core	up to 100 W
AMD A10-6700 (Trinity) Quad Core	up to 65 W
AMD A10-6800K (Trinity) Quad Core	up to 100 W
AMD Athlon X2 340 (Trinity) Dual Core	up to 65 W
AMD Athlon X4 740 (Trinity) Quad Core	up to 65 W
AMD A4 6300 (Richland) Dual Core	up to 65 W
AMD A6 6400K (Richland) Dual Core	up to 65 W
AMD A8 6500 (Richland) Quad Core	up to 65 W
AMD A8 6600K (Richland) Quad Core	up to 100 W
AMD A10 6700 (Richland) Quad Core	up to 65 W
AMD A10 6800K (Richland) Quad Core	up to 100 W
AMD FX670K (Richland) Quad Core	up to 65 W

Memory upgrade information

Dual channel memory architecture
Four 240-pin DDR3 DIMM sockets
Supports DDR3 DIMMs
- PC3-10600 (DDR3-1333)
- PC3-12800 (DDR3-1600)
- PC3-14400 (DDR3-1866)
32 GB unbuffered max memory
Supports 1 GB, 2 GB, 4 GB or 8 GB DIMMs
Supports up to 4 GB on 32-bit systems

note:
32-bit systems cannot address a full 4.0 GB of memory.
Supports up to 32 GB on 64-bit systems

note:
Maximum memory shown reflects the capability of the hardware and can be limited further in the operating system.

Video

Integrated Graphics

*Integrated video is not available if a graphics card is installed.

Integrated graphics
DX 11
Supports PCI Express x16 graphics cards (Gen 2.0 speed)

Audio

Integrated IDT 92HD73E Audio

Audio codec: IDT 92HD73E
7.1 channel audio

Network

LAN: 1000BASE-T

Technology: Atheros AR8161L gigabit Ethernet controller
Data transfer speeds: up to 10/100/1000 Mb/s
Transmission standards: 1000BASE-T Ethernet

Expansion Slots

One PCI Express x16 (Gen 2.0)
Three PCI Express x1 (Gen 2.0)
One mini card

I/O Ports and internal connectors

Back I/O ports

Figure : Back I/O panel

USB 2.0: 2

Optical S/PDIF-out port

VGA

DVI-D

LAN

USB 2.0: 2

USB 3.0: 2

Audio: Center/Subwoofer port (yellow orange)

Audio: Rear Speaker Out port (black)

Audio: Side Speaker Out port (gray)

Audio: Line In port (light blue)

Audio: Line Out port (lime)

Audio: Microphone port (pink)

Internal Connectors

1x CPU
1x ATX 24-pin Power
1x ATX 4-pin Power
6x SATA 6 Gb/s
1x CPU Fan
1x System Fan
1x WLAN card LED
1x Front Panel
1x Front Panel Audio
2x USB 2.0 (4 ports)
1x USB 2.0 (1 ports)
1x USB 3.0

Clearing the CMOS settings

caution:
Do not change any jumper setting while the computer is on. Damage to the motherboard can result.

This motherboard has a jumper to clear the CMOS RAM.

Turn OFF the computer and unplug the power cord.
Move the jumper to from pins 1-2 (default) to pins 2-3, then move the jumper back to default.
Plug the power cord and turn ON the computer.

Clearing the PASSWORD settings

The BIOS password is used to protect BIOS settings from unwanted changes.

To erase the BIOS password follow these steps:

Turn OFF the computer and unplug the power cord.
Move the jumper to from pins 1-2 (default) to pins 2-3, then move the jumper back to default.
Plug the power cord and turn ON the computer.