Printer Specifications for HP Officejet Pro 8500 Premier and 8500 Wireless All-in-One Printers

Supported Windows operating systems: Windows 2000, Windows XP, Windows XP x64, Windows Vista, Windows 7

note:

For Windows 2000 SP 4, Windows XP x64 Edition SP 1, Windows XP SP 1 Starter Edition, and Windows Vista Starter Edition, only the printer driver, scanner driver, and printer Toolbox are available.

note:

A USB cable can be purchased from any reputable dealer.

Supported Macintosh operating systems: Mac OS X v10.4, v10.5, v10.6, and v10.7.

note:

A USB cable can be purchased from any reputable dealer.

*Some cartridges provide more page yield than others. Click here for more information about page yields.

note:

Output tray capacity is affected by the type of paper and the amount of ink you are using. HP recommends emptying the output tray frequently.

• CompactFlash (Type I and II)
• Memory Stick, Memory Stick Duo, Memory Stick Pro, MagicGate Memory Stick Duo

  note:

  Memory Stick Duo requires an adapter, which must be purchased separately. Not using an adapter may damage the device.

• Memory Stick Micro (requires adapter, sold separately)
• Secure Digital
• High-Capacity Secure Digital
• miniSD, microSD (requires adapter, sold separately)
• MultiMediaCard (MMC), Secure MultiMediaCard
• Reduced-Size MultiMediaCard (RS-MMC), MMC Mobile, MMCmicro (requires adapter, sold separately)
• xD-Picture Card

• Operating temperature: 5° to 40° C (41° to 104° F)
• Recommended operating conditions: 15° to 32° C (59° to 90° F)
• Recommended relative humidity: 25 to 75% noncondensing

• Storage temperature: -5° to 60° C (23° to 140° F)
• Storage relative humidity: Up to 90% noncondensing at a temperature of 60° C (150° F)

This product is designed to reduce power consumption and save natural resources without compromising product performance. It has been designed to reduce total energy consumption both during operation and when the device is not active. This product qualifies for ENERGY STAR®, which is a voluntary program established to encourage the development of energy-efficient office products.

ENERGY STAR is a U.S. registered service mark of the U.S. EPA. As an ENERGY STAR partner, HP has determined that this product meets ENERGY STAR guidelines for energy efficiency.

For more information, go to the Energy Star website (in English).

To view Material Safety Data Sheets (MSDS), go to http://www.hp.com/go/msds (in English).

This product generates no appreciable ozone gas (O₃).

This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002. Plastic parts over 25 grams (0.88 ounces) are marked according to international standards that enhance the ability to identify plastics for recycling purposes at the end of product life.

HP offers an increasing number of product return and recycling programs in many countries and regions, and partners with some of the largest electronic recycling centers throughout the world. HP conserves resources by reselling some of its most popular products. For more information about the recycling of HP products, go to www.hp.com/go/recycle (in English).

For regulatory identification purposes, the product is assigned a Regulatory Model Number. The Regulatory Model Number for the product is SNPRC-0703-01 (HP Officejet Pro 8500 All-in-One Series) or SNPRC-0703-02 (HP Officejet Pro 8500 Wireless All-in-One or HP Officejet Pro 8500 Premier All-in-One). This regulatory number should not be confused with the marketing name (HP Officejet Pro 8500 All-in-One Series) or product number.

The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized. This product and any attached external antenna, if supported, shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm (8 inches) during normal operation.