hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information

    Audio or sound issues? Try our automated HP Audio check!

    Information

    Fix and resolve Windows 10 update issue on HP Computer or Printer. Click here

    Information
    Create an HP account today!

     Connect with HP support faster, manage all of your devices in one place, view warranty information and more. Learn more​

hp-concentra-wrapper-portlet

Actions
Loading...

HP Color LaserJet MFP M681, M682, E67660, HP LaserJet MFP M631, M632, M633 - Removal and replacement: Staple cartridge and carrier

Learn how to remove and replace the staple cartridge and carrier.

Note:

The process demonstrated in the video below also applies to the HP LaserJet Enterprise MFP M631, M632, M633 printers.

Mean time to repair: 5 minutes

Service level: Basic

Important:

When applicable, special installation instructions are provided for an assembly at the end of the removal procedure. Always completely read the removal instructions and follow all special installation instructions.

Before performing service

  • Disconnect the power cable.

    Warning:

    To avoid damage to the printer, turn the printer off, wait 30 seconds, and then remove the power cable before attempting to service the printer.

Use the table below to identify the correct part number for your printer. To order the part, go to www.hp.com/buy/parts

Note:

The staple carrier is refillable. Do not discard the staple carrier.

Part information

Part numbers

Part description

J8J96A

Staple cartridge refill

Required tools

  • No special tools are needed to remove or install this assembly.

After performing service

Turn the printer power on

  • Connect the power cable.

  • Use the power switch to turn the power on.

Post service test

Print a multiple page document and request that it is stapled. Verify that the document is correctly stapled.

Remove the staple cartridge and carrier

Follow these steps to remove the staple cartridge and carrier.

  1. Open the staple-cartridge door.

    Note:

    Opening the staple-cartridge door disables the stapler.

    Open the staple-cartridge door
  2. Grasp the colored tab on the staple cartridge, and then pull the staple cartridge straight out.

    Remove the staple cartridge
  3. Lift two tabs on the staple cartridge, and then lift up to remove the empty staple cartridge from the staple cartridge carriage assembly.

    Note:

    Do not discard the staple carrier.

    Release the staple cartridge refill

    Release the staple cartridge refill

Unpack the replacement assembly

Follow these steps to unpack the replacement assembly.

  1. Dispose of the defective part.

    Note:

    HP recommends responsible disposal of the defective part.

    http://www8.hp.com/us/en/hp-information/environment/product-recycling.html

  2. Unpack the replacement part from the packaging.

    CAUTION:

    Some parts are sensitive to electrostatic discharge (ESD). Always perform service work at an ESD-protected workstation or mat. If an ESD workstation or mat is not available, touch the sheet-metal chassis to provide a static ground before touching an ESD-sensitive assembly. Protect the ESD-sensitive assemblies by placing them in ESD pouches when they are out of the printer.

    Important:

    Make sure that all of the shipping materials (for example shipping tape) are removed from the replacement part prior to installation.

    Note:

    If the replacement part is a roller or pad, avoid touching the spongy part of it. Skin oils on the roller or pad can cause paper pickup and/or print-quality problems. HP recommends using disposable gloves when handling rollers or pads or washing your hands before touching rollers or pads.

  3. To install an assembly, reverse the removal steps.

    Note:

    When applicable, special installation instructions are provided for an assembly at the end of the removal procedure. Always completely read the removal instructions and follow all special installation instructions.

Install the staple cartridge

Follow these steps to install the staple cartridge.

  1. Insert the new staple cartridge into the staple cartridge carriage.

    Install the staple cartridge refill

    Install the staple cartridge refill
  2. Insert the staple cartridge into the stapler and press the colored handle toward the printer until it snaps into place.

    Install the staple cartridge
  3. Close the staple-cartridge door.

    Close the staple-cartridge door

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Romania

hp-detect-load-my-device-portlet

Actions
Loading...