solution Contentsolution Content

Samsung Laser Printers - Paper Does Not Feed Properly

The following might cause paper to not feed properly:
  • Paper is not correctly placed in the tray.
  • Too much paper in the paper tray.
  • Paper is not standard sized paper.
Try the following to resolve:
  1. Power the printer off and unplug it.
  2. Remove the paper tray.
    Figure : Paper tray
  3. Make sure no debris is blocking the paper pathway.
  4. Remove the paper from the tray and verify if its standard paper.
    1. If not standard, adjust the tray per the paper size or use the manual feeder.
    2. If the paper is standard, go to the next step.
    Figure : Tray adjustment
  5. Fan and flex the paper, then place only ten sheets of paper back in the tray.
    Figure : Fan and flex
  6. Insert the paper tray.
  7. Plug the printer in and power it on to resume printing.
If the problem persists, go to support.hp.com.