hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information

    Fix and resolve Windows 10 update issue on HP Computer or Printer. Click here

hp-concentra-wrapper-portlet

Actions
Loading...

Replacing Cartridges for HP TopShot LaserJet Pro M275

Introduction

This document contains steps to replace old print cartridges with new ones.

Replacing print cartridges

Follow these steps to make sure that the new print cartridge is compatible with your HP product, and then replace the old print cartridge.

Step one: Check print cartridge compatibility

Before unpacking a new print cartridge, make sure that it is compatible with your HP product.
Purchase replacement cartridges and other supplies from the HP Store or local retailers.

Step two: Replace a print cartridge

Follow these steps to replace the print cartridges.
  1. Press the Power button () to turn on the product.
  2. On the product control panel, touch the Supplies icon (). The Supplies Status screen opens.
  3. Touch Cartridge Rotate to select a print cartridge. A message indicates the selected print cartridge.
      caution:
    Wait until the rotation sounds stop before you proceed.
  4. Raise the camera arm to the fully open position.
    Figure : Raise the camera arm
    Image: Raise the camera arm
  5. Remove the capture stage, and then set it aside.
    Figure : Remove the capture stage
    Image: Remove the capture stage, and then set it aside.
  6. Open the print cartridge door.
    Figure : Open the print cartridge door
    Image: Open the print cartridge door
  7. Grasp the handle on the print cartridge, and then pull the print cartridge straight out to remove it.
    Figure : Remove the print cartridge
    Image: Remove the print cartridge
  8. Remove the new print cartridge from its packaging.
    Figure : Remove the new print cartridge from its packaging
    Image: Remove the new print cartridge from its packaging.
  9. Place the old print cartridge in the bag and box for recycling.
    Figure : Recycle the old print cartridge
    Image: Recycle the old print cartridge.
  10. Grasp both sides of the print cartridge. Gently rock the print cartridge from front to back to distribute the toner evenly.
    Figure : Gently rock the print cartridge
    Image: Rock the print cartridge from front to back
  11. Grasp the print cartridge by the center handle, and then remove the plastic shield.
    Figure : Remove the plastic shield
    Image: Remove the plastic shield
    note:
    Do not touch the print cartridge roller. Fingerprints on the roller can cause print quality issues.
  12. Remove any tape from the print cartridge, and then place the tape in the recycle box with the old print cartridge.
    Figure : Remove any protective tape
    Image: Remove any  tape
  13. Grasp the print cartridge by the center handle, and then insert the print cartridge into the correct slot.
    Figure : Insert the print cartridge
    Image: Insert the print cartridge
    TIP
    Look for color-coded icons on the print cartridge slot to insert the print cartridge in the correct slot.
  14. Close the print cartridge door.
    Figure : Close the print cartridge door
    Image: Close the print cartridge door
    After you close the print cartridge door, the control panel displays the 'Calibrating' message. Wait until the product is idle and silent before you proceed.
    note:
    If you need to replace another print cartridge, you must close the print cartridge door before touching the Cartridge Rotate button again.
  15. If you need to replace other print cartridges, touch the Supplies icon () again, and then select the next print cartridge.
  16. Touch Cartridge Rotate to rotate the carousel to the next print cartridge, and then repeat the previous steps to replace the print cartridge.
      caution:
    Wait until the rotation sounds stop before you open the print cartridge door each time.
  17. Reinstall the capture stage.
    Figure : Reinstall the capture stage
    Image: Reinstall the capture stage
  18. Lower the camera arm.
    Figure : Lower the camera arm
    Image: Lower the camera arm

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Romania

hp-detect-load-my-device-portlet

Actions
Loading...