This document explains how to set up the physical parts of the product. Complete these steps before you install the product software on your computer.
hp-support-head-portlet
Actions
- ${title}
Loading...
Welcome to HP Customer Support
hp-contact-secondary-navigation-portlet
Actions
- ${title}
Loading...
hp-hero-support-search
Actions
- ${title}
Loading...
hp-share-print-widget-portlet
Actions
- ${title}
Loading...
hp-concentra-wrapper-portlet
Actions
- ${title}
Loading...
HP Photosmart Plus e-All-in-One (B210a, B210b, B210c, and B210e) Printers - Setting up the All-in-One (Hardware)
This document includes the following steps to set up the product:
-
Unpack the All-in-One
-
Connect the power cord and adapter
-
Turn on power
-
Select the language/region
-
Load plain paper
-
Install the cartridges
-
Align the printer
Setting up a new All-in-One
Follow these steps to set up the product hardware and install the software.
-
Remove all tape from the front and back of the product and from the control panel display.Figure : Remove packing tape
-
Open the product and remove all the packaging materials from inside the product.Figure : Remove packing materials
-
Connect the power cord to the back of the product.Figure : Connect the power cord to the product
-
Connect the power cord to the power supply.Figure : Connect the power cord to the power supply
-
Connect the power cord to the electrical outlet.Figure : Connect the power cord to the electrical outlet
Press the Power button (
) to turn the product on.
) to turn the product on.
Figure : Press the Power button
Step four: Select the language/region
After turning the product on, the product displays a list of possible language settings. Use the following steps to set the default language and country/region for your product.
-
On the product control panel, touch the correct language. Touch the Down Arrow (
) to scroll through the languages, if necessary. -
When prompted, touch Yes or No to confirm or reject the language selection.
-
On the product control panel, touch the correct country/region. Touch the Down Arrow () to scroll through the country/region options, if necessary.
-
When prompted, touch Yes or No to confirm or reject the country/region selection.
-
Raise and hold the output tray in the open position.
-
Slide the paper width guide to its outermost position.Figure : Slide the paper guide outward
-
Insert the paper stack into the input tray with the short edge forward and print side down.Figure : Load plain paper
-
Slide the paper width guide inward until it rests against the stack of paper.Figure : Slide the paper width guide inward
-
Lower the output tray, and then pull the tray extender towards you, as far as it will go. Flip the paper catch at the end of the tray extender.Figure : Lower the output tray
-
Press the Power button () to turn on the product, if it is not already turned on. Wait until the product is idle and silent before continuing.
-
Open the cartridge access door. The carriage moves to the center of the product. Wait until the carriage is idle and silent before continuing.Figure : Open the cartridge access door
-
On the new cartridge, pull the orange pull-tab straight back to remove the plastic wrap.Figure : Remove the plastic wrap
-
Twist the orange cap counter clockwise to snap it off.Figure : Remove the orange cap
-
With the cartridge contacts facing the printhead, slide the cartridge into the empty slot. Press down on the cartridge until it clicks firmly into place.Figure : Install the cartridge
-
Repeat these steps to install the other cartridges.Figure : All cartridges installed
-
Close the cartridge door. The carriage returns to the right side of the product.Figure : Close the cartridge access door
Step seven: Align the product
After installing the cartridges, touch OK on the product control panel. The product automatically prints an alignment page to align the product.
Figure : Example alignment page
Getting started with ePrint
Now you can stay connected and productive on the go with ePrint. ePrint lets you print directly to your ePrint-enabled HP printer using a smartphone, notebook, or other mobile device. For additional information related to setting up and using ePrint, click the link provided.
|
HP ePrint
|
hp-feedback-input-portlet
Actions
- ${title}
Loading...
hp-online-communities-portlet
Actions
- ${title}
Loading...
Ask the community!
Support Forum
Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now
hp-feedback-banner-portlet
Actions
- ${title}
Loading...
hp-country-locator-portlet
Actions
- ${title}
Loading...
Country/Region:
Romania
Romania
hp-detect-load-my-device-portlet
Actions
- ${title}
Loading...
