hp-support-head-portlet

Actions
Loading...

Welcome to HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information
    Looking for Site Help?

    Learn about the features of the HP Customer Support site and how to use them to meet your online support needs. Click Here

     

hp-concentra-wrapper-portlet

Actions
Loading...

HP Designjet 50ps Printers - Software RIP Install Fails

Issue:
The 50ps software RIP installation fails and the HP Jetdirect card has not been configured and connected to the Local Area Network (LAN).
  note:
The HP Jetdirect (network card) that is included with the HP Designjet 50ps hardware, must be configured and connected to a Local Area Network (LAN) prior to the installation of the RIP software. If the HP Jetdirect card remains in the printer, it must be configured for a network connection, even if the printer will be connected via USB or parallel.
Solution
Configure the HP Jetdirect card prior to installing the software. Make sure the green light on the HP Jetdirect card is on after installing the network cable. Otherwise remove the HP Jetdirect card completely.
Summary
A firmware issue in the HP Jetdirect card will not allow the installation of the 50ps RIP software without configuring the Jetdirect card first. The RIP software is sending internal commands that the firmware's parser is not able to recognize and the installation will stop. If the HP Jetdirect card is to be left installed, it must be configured before the software is installed or the card may be removed entirely.

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country: Flag Romania

hp-detect-load-my-device-portlet

Actions
Loading...