hp-support-head-portlet

Acciones
Cargando...
Soporte al cliente de HP: base de conocimientos

hp-contact-secondary-navigation-portlet

Acciones
Cargando...

hp-share-print-widget-portlet

Acciones
Cargando...
  • Información
    Solucione problema de impresora HP en macOS

    El mensaje "Un [componente de software] dañará su computadora" aparece durante la impresión o instalación - Haga clic aquí

    Información

    ¿Problemas de audio o sonido? ¡Pruebe nuestro automatizado HP Audio check!

    Información

    Arregle y solucione problemas de actualización de Windows 10 en una Computadora o Impresora HP. Haga clic aquí

    Información
    ¡Cree una cuenta HP hoy!

    Conéctese con el soporte de HP de manera más rápida, administre todos sus dispositivos en un solo lugar, vea la información de garantía y más. Más información

hp-concentra-wrapper-portlet

Acciones
Cargando...

HP EliteBook 8530p Notebook PC - Removing and Replacing the SIM Card

Introduction

This document is provided to assist in removing and replacing the SIM card for the HP EliteBook 8530p Notebook PC.

Minimum skill level

The End User requires no hardware-specific training to replace the defective part. The End user should have familiarity with system hardware and software requiring repair.

Parts required

nota:
The SIM Card, (a wireless subscriber identity module) is not an HP part and is provided by a local wireless telephone communications service provider. The SIM slot is located inside the battery bay.

Summary of instructions

To view a video demonstrating the procedure for removing the SIM card, click on the link below. Or use the product video listing on the HP Services Media Library, then select SIM Card from the menu on the upper left hand side of the screen.
Right-click on the video link above to open in a new window/tab.

SIM card removal

  1. Review the safety considerations before performing the steps listed below by clicking on the following link:
      atención:
    Failure to comply with the precautions could result in damage to your product or loss of data.
  2. Press in and release the SIM card to partially eject it from the base enclosure.
  3. Pull the SIM card out of the SIM card slot in the base enclosure.
  4. Place the SIM card in a static dissipative bag.

SIM card replacement

  1. Remove the SIM card from the static dissipative bag.
  2. With the circuit etching facing up, insert and press the SIM card into the SIM card slot in the base enclosure.

hp-feedback-input-portlet

Acciones
Cargando...

hp-feedback-banner-portlet

Acciones
Cargando...

hp-country-locator-portlet

Acciones
Cargando...
País/región: Flag Puerto Rico

hp-detect-load-my-device-portlet

Acciones
Cargando...