Centrum obsługi klienta HP - Baza wiedzy

hp-contact-secondary-navigation-portlet

Działania
Trwa ładowanie...

hp-share-print-widget-portlet

Działania
Trwa ładowanie...
  • Informacja
    Windows 11

    Najczęściej zadawane pytania i odpowiedzi znajdziesz tutaj.

  • Opinie

hp-concentra-wrapper-portlet

Działania
Trwa ładowanie...

HP Photosmart C4100 Series All-in-One - Installing Print Cartridges

Introduction

This document contains information about installing the print cartridges.

Installing the print cartridges

Uwaga:
The HP All-in-One must be powered on before you can insert the printcartridge.
  1. Place the unit flat on a level surface.
  2. Open the print cartridge door by lowering it until it stops. The print carriage moves to the far right side of the HP All-in-One.
    Rys. : Print cartridge door and print carriage
  3. Pull the pink tab to remove the tape from the print cartridge.
    Rys. : Removing the pink tab
      Przestroga:
    Donot touch or remove the ink nozzles orcopper-colored contacts, or re-tape thecartridges.
    Rys. : Do not touch ink nozzles or copper-colored contacts
  4. Insert each print cartridge as follows:
    Uwaga:
    • Insert the tri-color print cartridge in the slot on the left side, marked with a green label.
    • Insert the black (or photo) print cartridge in the slot on the right side, marked with a black and orange label.
    1. Hold the print cartridge with the HP label facingup.
    2. Push the print cartridge firmly into the corresponding slot until it snaps intoplace.
      Rys. : Inserting the print cartridge
      Rys. : Print cartridges properly installed
  5. Close the access door.
    Rys. : Access door being closed


hp-feedback-banner-portlet

Działania
Trwa ładowanie...

hp-country-locator-portlet

Działania
Trwa ładowanie...
Kraj/region: Flag Polska

hp-detect-load-my-device-portlet

Działania
Trwa ładowanie...