Enable wireless charging for HP ENVY 32 All-in-One 32-a000 and HP ENVY 32 All-in-One 32-a100 computers

If Power Saving Mode is enabled, wireless charging is disabled in the S5 (shutdown) power state. To enable wireless charging in Power Saving Mode, use the following procedure.

1. Press the OSD button found on the bottom edge of the monitor.

2. After the main menu is displayed, press the OSD button again to open the HP ENVY OSD menu.

3. Select Power.

4. Under Power Mode, select Full-Feature.

5. Under Wireless Charging, select On to enable wireless charging.