Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

hp-support-head-portlet

Actions

HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions

hp-share-print-widget-portlet

Actions

Information

Fix and resolve Windows 10 update issue on HP Computer or Printer. Click here

Information

Audio or sound issues? Try our automated HP Audio check!

Information

Create an HP account today!
Connect with HP support faster, manage all of your devices in one place, view warranty information and more. Learn more

hp-concentra-wrapper-portlet

Actions

HP Indigo WS6000 Digital Press - Threading the substrate

The substrate is threaded through the entire press.

Figure : Substrate path through entire press

To thread the substrate through the press:

Mount a new substrate roll on the unwinder, as follows:
1. Lower the lifting arm.
2. Remove the used substrate roll from the unwinder.
3. . Deflate the shaft and remove the core.
4. Install a new substrate roll on the shaft. Ensure that the substrate roll is centered on the shaft.
5. Inflate the shaft.
6. Install the new substrate roll on the unwinder. Ensure that the shaft gear points towards the rear of the unwinder.
7. Raise the lifting arm.
8. Manually rotate the substrate roll until the gears mesh.
Thread the substrate through the unwinder. Ensure that the substrate goes beneath the two clamps. Ensure that the substrate goes behind the web guide sensor.

Figure : Substrate path through unwinder

Clamps

Web guide sensor
Figure : Substrate behind web guide sensor
Thread the substrate through the unwinder bridge.
Figure : Substrate path through unwinder bridge
Thread the substrate through the printing engine.
Figure : Substrate path through printing engine
Thread the substrate through the rewinder. Ensure that the substrate goes beneath the two clamps.
Figure : Substrate path through rewinder
If necessary, thread the substrate through the packer arm.
Figure : Substrate path through packer arm
Ensure that the substrate is threaded correctly through the entire press.