HP LaserJet Enterprise, HP OfficeJet Enterprise, HP PageWide Enterprise - Configure the paper size and type settings on the printer

Follow these steps to configure the paper size and type settings when you are loading paper into the tray.

1. Load paper in the tray and then close the tray (if you are using Tray 2 or Tray 3).

   Note:

   Ensure that the paper-length and paper-width guides are adjusted to the size of paper being used in the tray. The guides should rest against the stack of paper, but should not bend it.

2. Select OK to accept the detected paper size and type, or select Modify to choose a different paper size or type.

   Note:

   Some printer models do not automatically detect the size and type of paper being used.

3. Select the correct size and type, and then select OK (or Done) to save the settings.

Follow these steps to configure the tray and paper settings in the software program before sending a print job to the printer.

1. In the software program, specify the source tray, the paper size, and the paper type.

   For information on how to specify these settings in the software program, refer to one of the documents below that corresponds with your operating system (Windows or Mac):

   • HP LaserJet, HP OfficeJet Enterprise, HP PageWide Enterprise - Change print-job settings (Windows)

   • HP LaserJet, HP OfficeJet Enterprise, HP PageWide Enterprise - Change print-job settings (macOS)

2. Select Print in the software program to send the job to the printer.

   If the tray needs to be configured, a tray configuration message displays on the printer control panel.

3. Load the tray with the specified type and size of paper, and then close the tray.

4. Select OK to accept the detected size and type, or select Modify to choose a different paper size or type.

5. Select the correct size and type, and then select OK (or Done) to save the settings.