HP LaserJet Managed MFP E72425, E72430, E77422, E77428, E78223, E78228 - Load paper to Tray 1 (multipurpose tray)

note:

Select the correct paper type in the print driver before printing.

  caution:

To avoid jams, never add or remove paper from Tray 1 during printing.

1. Open Tray 1.
   Figure : Open the tray

   
2. Pull out the tray extension to support the paper.
   Figure : Pull out the tray extension

   
3. Use the adjustment latch to spread the paper guides outward.
   Figure : Expand the paper guides

   
4. Load paper in the tray. Make sure that the paper fits under the fill line on the paper guides.

   note:

   The maximum stack height is 10 mm, or approximately 100 sheets of 75 g/m² paper.

   Figure : Load paper

   
5. Using the adjustment latch, adjust the side guides so that they lightly touch the paper stack, but do not bend it.
   Figure : Adjust the paper guides