solution Contentsolution Content

HP Designjet 815mfp and 4200 Scanner - Windows XP Based Scanner Software Installation

  caution:
Do not format the hard drive on the PPC.
  1. Disconnect both scanner and printer from the PPC and do not connect them before explicitly told to do so in this document.
  2. Connect a keyboard and a mouse to the PPC.
  3. Install Windows XP. Delete and recreate the first partition, where all the components need to be installed.
  4. Do not remove or alter the second partition. D.\Images should be not modified.
  5. Remember to switch on automatic updates, if you want to keep the system updated.
  6. Update Windows XP with Service Pack 2, and all other security updates.
  7. Insert the HP Designjet Scanner Software – Windows XP based CD. The installer wizard will appear in your screen.
  8. Follow the on-screen instructions.
  9. When the installation is completed restart the PPC.
  10. Use the mouse connected earlier to right click on the ELO icon in the task bar.
  11. Select Align and follow the on-screen instructions to align the cursor.
  12. Shutdown and power off the PPC.
  13. Connect both the scanner and the printer to the PPC.
  14. Power on the PPC.
  15. When the PPC has restarted the Found new hardware screen will be displayed.
  16. If the installer shows the option to online check for drivers choose No.
  17. Select install the software automatically.
  18. Follow the on-screen instructions, once the wizard is completed the HP Designjet Scanner Software – Windows XP based is installed.
  19. If a warning screen is displayed during installation choose to Continue installing anyway.