hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP Designjet 100 - Mac OS: Firmware Version A.02.03 Required to use Designjet 100

Information

When using the HP Designjet 100 with the Mac OS Driver, Firmware A.02.03 or higher version is necessary. If this version is not used, the printer may not show in the Chooser (Mac OS 9) or in the Print Center (Mac OS X).
Printers that have the MAC driver in the box will have firmware version A.02.03. or higher. If a lower version is present, use TCP/IP or USB for the upgrade.
note:
MAC OS X v.10.2.3. or higher is required to do a firmware upgrade to version A.02.03 or higher.

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag New Zealand

hp-detect-load-my-device-portlet

Actions
Loading...