hp-support-head-portlet

Actions
Loading...

Welcome to HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information
    We are upgrading our website

    If you experience errors during this time, please try again later. 

hp-concentra-wrapper-portlet

Actions
Loading...

HP Designjet Printers - HP-GL/2 Driver Release Version 4.62

Introduction
The HP-GL/2 driver release version 4.62 is intended for HP Designjet 200, 300, 400, 600, 700, 1000, and CP Series printers. This release also includes the Designjet Colorpro CAD printer. Below is an overview of the new driver.
The release includes WHQL certification in Designjet 1000 series printers for Windows 2000 and Microsoft® Windows XP plus some other addition updates.
Binary sets for version 4.62
  • Windows 16 bit binary for Windows 95, 98 and Me
  • Windows 32 bit binary working in Kernel Mode for Windows NT 4.0
  • Windows 32 bit binary working in User Mode for Windows 2000 and XP
WHQL certification
To obtain the Windows Hardware Quality Labs (WHQL) certification, a driver must pass a series of standard compatibility tests defined by Microsoft. The tests suits differ depending on the operating system. A detailed description of the certification and the tests can be found at Microsoft's website. Once a driver has past the tests, it gets the digital signature that avoids the warning message “Digital Signature Not Found” at the end of the driver’s installation and the products associated with this driver are included in the Windows Hardware Compatibility List that is published by Microsoft. Products with a certified driver can also include the “Windows compatible” logo in the box and in the product. In release version 4.62 of the driver, two products have been WHQL certified: HP Designjet 1050c and 1055cm. The certification has been obtained for Windows 2000 and Windows XP.
Additional updates
  • Standard and user defined patterns no longer print only in black
  • The “Rear path” source for ColorPro CAD has been added
  • Metafile images (*.EMF and *.WMF) inserted in documents will now print properly
  • The correct scaling factor now applies to troublesome roll and sheet paper sizes
  • Some Quattro Pro table borders that didn't print in earlier versions, will now print
  • The default color option in the “Manual Color” section of the driver in the “Options tab” has been changed to “Match Screen” in order to pass the WHQL certification tests
Click here to download HP drivers and/or software at http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?locale=en_US
  note:
The new version 4.62 HP-GL/2 driver will be included in version 11 of the HP Designjet software setup CD MacroInstaller.

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country: Flag New Zealand

hp-detect-load-my-device-portlet

Actions
Loading...