Replace the toner cartridge if it is low or empty.
-
Turn off the printer, and then disconnect the power cord from the wall socket or power strip.
advarsel:
You must disconnect the power cord before reaching inside the printer to avoid risk of injuries or electric shock.
-
Open the toner cartridge access door.
-
Grasp each side of the toner cartridge, and then pull out the toner cartridge to remove it.
-
Remove the new toner cartridge from its package, and then recycle the packing materials.
-
Grasp both sides of the toner cartridge, and then gently rock the toner cartridge back and forth to distribute the toner.
-
Lift the cover, and then pull out the cover until you remove all the sealing tape from the toner cartridge.
-
Align the new toner cartridge with the tracks inside the printer, and then push in the toner cartridge until it is firmly seated.
-
Repeat these steps to install any other new toner cartridges.
-
Close the toner cartridge access door.
-
Reconnect the power cord to the wall outlet or power strip, and then turn on the printer.
With the new toner cartridge installed, the printer is ready to print.