The following information describes how to load paper into Tray 1. This tray holds up to 100 sheets of 75 g/m2 paper.
let op:To avoid jams, never add or remove paper from Tray 1 during printing.
In addition to the instructions provided in this document, you can click the link below to view a video of how to load paper in Tray 1.
opmerking:The printer models referenced in this video might be different from your printer model, but the steps to load paper in Tray 1 are the same.
Open Tray 1.Afbeelding : Open Tray 1
Pull out the tray extension to support the paper.Afbeelding : Pull out the tray extension
Adjust the paper guides to the correct size and then load paper in the tray. For information about how to orient the paper, see the Tray 1 paper orientation section in this document.Afbeelding : Load paper in Tray 1
Make sure that the paper fits under the fill-line on the paper guides.Afbeelding : Make sure the paper is below the fill-line
Adjust the side guides so that they lightly touch the paper stack, but do not bend it.Afbeelding : Adjust the side guides