solution Contentsolution Content

HP Designjet T790 and T1300 ePrinter Series - Unload a roll

Before unloading a roll, check whether there is paper on the roll or if the roll is out of paper, and follow the appropriate procedure as described below.

Quick procedure with paper on the roll

If there is paper on the roll, just open the roll cover, and the roll is unloaded automatically.
opmerking:
When the roll is unloaded in this way, no barcode is printed on it, so the printer will not know the length of the roll when it is next loaded. See Printing paper infoPrinting paper info.
opmerking:
If you open the cover of roll 1 while a sheet is loaded, the sheet is also unloaded.

Front panel procedure with paper on the roll

If there is paper on the roll, you can unload it from the front panel.
  1. Press , then the roll icon, then Unload.
    Alternatively, press , then , then Paper > Paper unload > Unload roll 1 or Unload roll 2.
  2. You may need to open the roll cover.

Roll out of paper procedure

If the end of the paper is no longer attached to the core, use the following procedure.
  1. If you have already started the unload process, press on the front panel to cancel that procedure.
  2. Lift the blue lever on the left. If the front panel displays a warning about the lever, ignore it.
  3. Pull out the paper from the printer. Pull from wherever the paper is accessible; the back of the printer is recommended. You may need to open the roll cover.
  4. Lower the blue lever.