solution Contentsolution Content

HP Designjet T2300 eMFP Product Series - Safety precautions

Safety precautions

The following precautions ensure the proper use of the product and prevent the product from being damaged. Follow these precautions at all times.
  • Use the power supply voltage specified on the label. Avoid overloading the product's electrical outlet with multiple devices.
  • Ensure the product is well-grounded. Failure to ground the product may result in electrical shock, fire and susceptibility to electromagnetic interference.
  • Do not disassemble or repair the product yourself. Contact your local HP Service Representative for service, see Contact HP SupportContact HP Support.
  • Use only the electrical cord supplied by HP with the product. Do not damage, cut or repair the power cord. A damaged power cord has risk of fire and electric shock. Replace a damaged power cord with an HP-approved power cord.
  • Do not allow metal or liquids (except those used in HP Cleaning Kits) to touch the internal parts of the product. Doing so may cause fire, electric shock or other serious hazards.
  • Turn off the product and unplug the power cable from the power outlet in any of the following cases:
    • When placing your hands inside the product
    • If there is smoke or an unusual smell coming from the product
    • If the product is making an unusual noise not heard during normal operation
    • A piece of metal or a liquid (not part of cleaning and maintenance routines) touches internal parts of the product
    • During a thunderstorm
    • During a power failure