HP Scanjet Scanners - USB Scanner Setup

This document is for HP Scanjet 200 and 300 Flatbed Scanners, Scanjet G3110, G4010, and G4050 Photo Scanners, and Windows and Mac computers.

Set up your HP scanner for a USB cable connection

to a Windows or Mac computer.

Windows

Download the driver from the HP website to complete the setup with your Windows computer.

Turn on the scanner.
If your scanner is connected to the computer with a USB cable, disconnect the cable from the scanner. The software installation prompts you to connect the cable if needed.
Go to HP Customer Support - Software and Driver Downloads.
If a Let's identify your product to get started page displays, click Other, type your scanner model number, and then click Submit.

The software results page for your scanner displays with the default operating system selected.
If you need to change the version of Windows, click Change, select your version, and then click Change.
Under the Driver heading, click Download for the full software package, or click Basic Drivers for other driver options.

Download the driver from the HP website to complete the setup with your Mac computer.

Turn on the scanner.
If your scanner is connected to the computer with a USB cable, disconnect the cable from the scanner. The software installation prompts you to connect the cable if needed.
Go to HP Customer Support - Software and Driver Downloads.
If a Let's identify your product to get started page displays, click Other, type your scanner model number, and then click Submit.

The software results page for your scanner displays with the default operating system selected.
If you need to change the version of Windows, click Change, select your version, and then click Change.
Under the Driver heading, click Download for the full software package, or click Basic Drivers for other driver options.
Follow the instructions to download and install the scanner software.
- If you installed the HP Scanjet ICA for Mac OS X software, the Apple Image Capture app opens, and you are ready to scan.
- If you installed the scanner software with HP Easy Start, continue to the next step.
Place an original on the scanner, and then click Scan Test Page to test the scanner connection.

Click Continue.
Click Continue Online to register your product, or close the HP Easy Start window.