The Automatic Document Feeder (ADF) will not pickup paper when scanning from ADF.
hp-support-head-portlet

- ${title}
Loading...
HP Customer Support - Knowledge Base
hp-contact-secondary-navigation-portlet

- ${title}
Loading...
hp-share-print-widget-portlet

- ${title}
Loading...
hp-concentra-wrapper-portlet

- ${title}
Loading...
HP LaserJet M1522 and M2727 MFP Product Series - Automatic Document Feeder "no paper pick" issue
Issue Description
Issue check
The ADF pickup roller might be in the wrong position due to a paper jam or improper operation of the ADF.
-
Check the sensor in the ADF to ensure it correctly detects paper.
-
Load a single sheet on the ADF feeder, if the display changes from Ready to Document Loaded the sensor is working (continue with step 2 below). If the sensor is not detecting paper continue with the Workaround section below.
-
-
Check the Pickup roller status:In printer ready phase, the ADF pickup roller should be in stop status.
-
Lift up the ADF cover.
-
Inspect on the ADF pickup roller.
-
In Printer ready phase, the Grey pickup roller should not touch the brown separation pad (as shown below).
-
If the Grey pickup roller is touching the the brown separation pad, then it will cause an ADF no pick failure.
-
Workaround
If this issue can be identified as a sensor issue or the pickup roller is in the wrong position (using steps above), a power cycle will reset the sensor and the pickup roller to correct status.
If a power cycle does NOT fix the issue, please contact HP support or an HP Authorized Service Center for further investigation.
Click here for information on contacting HP support at welcome.hp.com/country/us/en/wwcontact_us.html.
Additional support options
hp-feedback-input-portlet

- ${title}
Loading...
hp-feedback-banner-portlet

- ${title}
Loading...
hp-country-locator-portlet

- ${title}
Loading...
Country/Region:
Malaysia

hp-detect-load-my-device-portlet

- ${title}
Loading...
hp-hero-support-search

- ${title}
Loading...