Bienvenido(a) al Centro de Soporte al cliente HP - Software y controladores





HP LaserJet Pro MFP M426-M427 PCL 6 Print Driver (no installer)

Al efectuar la descarga, se compromete a aceptar los términos de uso de HP. Acuerdo de Licencia de Software HP

Microsoft Windows 10 (32 bits)

Microsoft Windows 10 (64 bits)

Microsoft Windows 7 (32-bit)

Microsoft Windows 7 (64-bit)

Microsoft Windows 8 (32 bits)

Microsoft Windows 8 (64 bits)

Microsoft Windows 8.1 (32 bits)

Microsoft Windows 8.1 (64 bits)

Microsoft Windows Server 2008 R2

Microsoft Windows Server 2008 x64

Microsoft Windows Server 2012

Microsoft Windows Server 2012 R2

May 13, 2019

This solution provides only the PCL 6 driver without an installer.
To install the print driver use the Add Printer Wizard.

System Requirements

The following are compatible system requirements for Windows:
  • CD-ROM or DVD drive, or Internet connection
  • Dedicated universal serial bus (USB 1.1 or 2.0) connectivity port, or network connection
  • 220 MB of available hard-disk space

Install Instructions

  1. Close any software programs running on your computer.
  2. Turn on the printer.
  3. Click on the Download button on this page.
    • NOTE: Depending on Operating System/browser version another window may open for the HP Download and Install Assistant when Download is selected. Use this download assistant if unsure of how or where to download the printer driver. The HP Download and Install Assistant should automatically start the driver download when completed and display the location of where the driver files are downloaded.
    • If the Download and Install Assistant is not available for the download selected, or is not used- follow the steps below:
      1. Click Run or Save File. The file will be downloaded to a temporary folder on your PC.
      2. Run the downloaded file.
      3. Make a note of the folder location in the self-extractor screen. This is where the files will be extracted.
      4. Click Yes after noting the extraction location.
      5. Go to Control Panel, and then select Printers.
      6. Click Add a printer.
      7. Answer the questions in the Add Printer Wizard until you reach the screen that shows the printer manufacturer list.
      8. Click Have Disk.
      9. Browse to the folder where the files were downloaded and extracted in step 6.
      10. Select the appropriate INF file.
      11. Click Open, and then click OK.
      12. Select the appropriate printer.
      13. Follow the remaining on-screen instructions to complete the printer installation.




País/región: Flag México