hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information

    Audio or sound issues? Try our automated HP Audio check!

    Information

    Fix and resolve Windows 10 update issue on HP Computer or Printer. Click here

    Information
    Create an HP account today!

     Connect with HP support faster, manage all of your devices in one place, view warranty information and more. Learn more​

hp-concentra-wrapper-portlet

Actions
Loading...

HP PageWide Enterprise Color 556, MFP 586 - Removal and replacement: Output bin

This document provides the procedures to remove and replace the output bin.

Mean time to repair: 3 minutes

Service level: Basic

Before performing service

Turn the printer power off

  • Disconnect the power cable.

    Warning:

    To avoid damage to the printer, turn the printer off, wait 30 seconds, and then remove the power cable before attempting to service the printer.

Use the table below to identify the correct part number for your printer. To order the part, go to www.hp.com/buy/parts.

Part information

Output bin kit part number

G1W39-67944

Output bin with instruction guide

Required tools

  • No special tools are needed to remove or install these assemblies.

After performing service

Turn the printer power on

  • Connect the power cable.

  • Use the power switch to turn the power on.

Post service test

Send a color print job to the printer.

Remove the right cover (outer)

Follow these steps to remove the right cover (outer).

  1. Pull out on the top corners of the right cover to release the top edge of the cover.

    Tip:

    Open the cartridge door to make removing the cover easier.

    Release the right cover (outer)

    Release the right cover (outer)
  2. Slide the cover up and away from the printer to remove it.

    Remove the right cover (outer)

    Remove the right cover (outer)

Remove the output bin

Follow these steps to remove the output bin.

  1. Slightly slide the output bin to the right, and then lift up on it to remove it.

    Remove the output bin

    Remove the output bin

Unpack the replacement assembly

Follow these steps to unpack the replacement assembly.

  1. Dispose of the defective part.

    Note:

    HP recommends responsible disposal of the defective part.

    http://www8.hp.com/us/en/hp-information/environment/product-recycling.html

  2. Unpack the replacement part from the packaging.

    CAUTION:

    Some parts are sensitive to electrostatic discharge (ESD). Always perform service work at an ESD-protected workstation or mat. If an ESD workstation or mat is not available, touch the sheet-metal chassis to provide a static ground before touching an ESD-sensitive assembly. Protect the ESD-sensitive assemblies by placing them in ESD pouches when they are out of the printer.

    Important:

    Make sure that all of the shipping materials (for example shipping tape) are removed from the replacement part prior to installation.

    Note:

    If the replacement part is a roller or pad, avoid touching the spongy part of it. Skin oils on the roller or pad can cause paper pickup and/or print-quality problems. HP recommends using disposable gloves when handling rollers or pads or washing your hands before touching rollers or pads.

  3. To install an assembly, reverse the removal steps.

    Note:

    When applicable, special installation instructions are provided for an assembly at the end of the removal procedure. Always completely read the removal instructions and follow all special installation instructions.

Install the output bin

Follow these steps to install the output bin.

  1. Position the replacement output bin on the printer. Align the tabs (callout 1) on the output bin with the slots (callout 2) in the top of the printer.

    Align the tabs and slots

    Align the tabs and slots
  2. Slide the output bin toward the printer to install it.

    Note:

    Make sure that the output bin is completely installed against the printer with no gaps in between.

    Install the output bin

    Install the output bin

Install the right cover (outer)

Follow these steps to install the right cover (outer).

  1. Position the bottom edge of the cover on the printer.

    Position the right cover (outer) on the printer

    Position the right cover (outer) on the printer
  2. Push in along the top edge of the right cover (outer) to install it.

    Install the right cover (outer)

    Install the right cover (outer)

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Latvia

hp-detect-load-my-device-portlet

Actions
Loading...