Maintenance & Service Guide: HP Pro 3120 MT, HP Pro 3125 MT, HP Pro 3130 MT

Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

hp-support-head-portlet

Actions

Welcome to HP Customer Support

hp-contact-secondary-navigation-portlet

Actions

hp-hero-support-search

Actions

Examples: "LaserJet Pro P1102 paper jam", "EliteBook 840 G3 bios update"

hp-share-print-widget-portlet

Actions

Information

Information regarding recent vulnerabilities
HP is aware of the recent vulnerabilities commonly referred to as "Spectre" and "Meltdown". HP has published a security bulletin with patches for these issues and a list of impacted systems. We will continue to update the bulletin as more information becomes available and encourage customers to check the bulletin frequently.

hp-concentra-wrapper-portlet

Actions

Maintenance & Service Guide: HP Pro 3120 MT, HP Pro 3125 MT, HP Pro 3130 MT

Microtower models

Desktop Dimensions Height Width Depth	15.10 in 7.27 in 16.16 in	38.35 cm 18.46 cm 41.05 cm
Approximate Weight HP Pro 3120 HP Pro 3125 HP Pro 3130	17.5 lb 17.7 lb 18.4 lb	7.94 kg 8.03 kg 8.35 kg
Temperature Range Operating Nonoperating	50° to 95°F -22° to 140°F	10° to 35°C -30° to 60°C
Relative Humidity (noncondensing) Operating Nonoperating (38.7°C max wet bulb)	10-90% 5-95%	10-90% 5-95%
Maximum Altitude (unpressurized) Operating Nonoperating	10,000 ft 30,000 ft	3048 m 9144 m
note: Operating temperature is derated 1.0° C per 300 m (1000 ft) to 3000 m (10,000 ft) above sea level; no direct sustained sunlight. Maximum rate of change is 10° C/Hr. The upper limit may be limited by the type and number of options installed.
Power Supply Operating Voltage Range Rated Voltage Range Rated Line Frequency	115V 90-132 VAC 100-127 VAC 50-60 Hz	230V 180-264 VAC 200-240 VAC 50-60 Hz
Power Output	300 W	300 W
Rated Input Current (maximum)¹	6A @ 100 VAC	3A @ 200 VAC

¹This system utilizes a passive power factor corrected power supply. The power factor correction is present in the 230V operating mode only. This allows the system to pass the CE mark requirements for use in the countries of the European Union. This supply requires the use of an input voltage range select switch.