HP Smart Tank Printers - Replacement printer instructions (Europe, Middle East, Africa)

Make sure the ink tank caps are secure, and then disengage the ink system. Place the printer in a well-padded box, and keep the printer level to prevent ink spills.

1. Turn off the printer.

2. Lift the ink access door.

   The carriage moves to the center of the printer.

   

3. Press the gray button on the printhead cover to disconnect the ink tubes.

   

4. Make sure the tank covers and tank caps are closed.

   

5. Close the ink access door.

   

6. Remove any paper from the input and output trays, and then close the trays.

7. Disconnect any cables connected to the printer.

8. Find a box that is large enough to hold the printer and packing material, such as the original box the printer came in.

9. Pack the printer securely with the original foam or other packing material, place the printer in the box, and then tape the box closed.

10. Keep the printer as level as possible.

    CAUTION:

    Do not tilt or turn the printer upside down.

    

Save the following parts from your current printer that will be used with the replacement printer.

• Ink bottles

  

• Power cord

  

• USB cable

  

• Printer manuals

  

Make sure your replacement printer works properly before returning your previous printer to HP.

1. Unpack the replacement printer from the box, connect the power cable, set your preferences, and then load plain paper in the input tray.

2. Go to 123.hp.com to install the recommended printer software or app to complete the setup and connect to your computer or mobile device.

3. Test all printer functions to make sure the printer is working properly.

4. Return your original printer to HP using the instructions that came with the replacement printer.