HP Color LaserJet Enterprise M455, MFP M480, HP Color LaserJet Managed E45028, MFP E47528 - Load paper to Tray 1 (multipurpose tray)

Follow these steps to load paper in Tray 1.

This tray holds up to 50 sheets of 75 g/m²20 lb paper.

CAUTION:

To avoid jams, never add or remove paper from Tray 1 during printing.

1. Open Tray 1 by grasping the handles on the left and right side of the tray and pulling down.

   

2. Slide out the tray extension.

   

3. Press down on the tab on the right paper guide, and then spread the paper guides to the correct size.

   

4. Load the paper into the tray. Make sure that the paper fits under the tabs and below the maximum height indicators.

   For information on how to orient the paper, see Tray 1 paper orientation.

   

5. At the computer, begin the printing process from the software application. Make sure that the driver is set to the correct paper type and size for the paper being printed from the tray.