- Support Home
- Software and Drivers
- Contact Us
- Business Support
- My HP Account
Apple AirPrint is a built-in print driver that allows you to print from an iPhone, iPad, or iPod touch to most HP printers.
To access additional printer features such as scanning and printer management tools, install the HP Smart app. For more information, go to HP printer setup (HP Smart app).
Make sure the printer and your Apple device are connected to the same wireless network.
On your Apple device, make sure Wi-Fi is turned on and there is a check mark next to the name of your local Wi-Fi network. If you are connected to a different network, tap the name of your network to join it.
Restart the printer, and then check the printer network connection status.
Printers with a touchscreen control panel: Touch the Wireless icon or open the Network Settings or Setup menu to view the network connection status.
Printers without a touchscreen control panel: Make sure the light next to the wireless icon or button is on and not blinking.
If the printer is not connected, continue to the next step.
Place the printer within range of the Wi-Fi router signal, and then connect it to the network.
Printers with a touchscreen control panel: Open the Setup, Network, or Wireless settings menu, select Wireless Setup Wizard, and then follow the instructions to select the network name and enter the password.
Printers without a touchscreen control panel: Press and hold the Wireless button for five seconds or until the wireless light starts to flash. Within two minutes, press and hold the WPS (Wi-Fi Protected Setup) button on the router until the connection process begins. The printer wireless light stops flashing when the connection completes.
HP Deskjet 6000 and 6400, ENVY 6000 and 6400, and Tango printers: Press and hold the Wi-Fi button and the Power button on the back of the printer for five seconds until the blue bar flashes. Within two minutes, press and hold the WPS button on the router until the connection process begins. The blue bar stops flashing when the connection completes.
Print documents, photos, and web pages from iPhone and iPad apps that support printing.
Make sure the printer is turned on, cartridges are installed, and the paper you want to print on is loaded in the correct paper tray.
Open the item you want to print, and then tap the Share icon ( or ), or the menu icon .
Scroll down the screen and select Print from the list of options.
Select your printer, and then select print job settings such as paper size, number of copies, and page range.
Available settings depend on the app you are printing from, the print job type, and your printer. For additional settings and scanning tools, install the HP Smart app.
Still have a question? Find additional answers and help.
Check the network connection and make sure AirPrint is enabled in the printer settings.
Check the network connection.
Make sure the printer Wi-Fi signal is on, and that it connects to the same network as your mobile device. If the printer has a Wireless icon or button with a light, make sure the light is on. The printer is disconnected from the network if the light is off or blinks.
Move the printer and the mobile device closer to the router to improve signal quality.
Open a website to check if the internet connection is working properly. If Wi-Fi is slow or intermittent, restart the router by disconnecting the power cord, waiting 15 seconds, and then reconnecting the cord.
Restart the printer to clear possible error conditions.
Open the Advanced Settings (EWS) in the HP Smart app or type the printer IP address into a web browser address bar.
In the Network settings, make sure the AirPrint status is On.
Send a print job using a Wi-Fi Direct printer connection. Complete these steps while next to the printer.
Get the Wi-Fi Direct printer name (Example: DIRECT-72-HP OfficeJet Pro 6970) and password.
Printers with a control panel menu: Touch the Wi-Fi Direct icon or button to view the Wi-Fi Direct name and password. Or from the Reports menu, print a Network Summary or Network Config page that lists the details.
Printers without a control panel menu: Print a network configuration report or help page. The name and password are listed under the Wi-Fi Direct section.
To print a network report, use a method that matches the control panel buttons on your printer.
Press the Information button .
Press and hold the Wi-Fi Direct button for 3 seconds.
Press the Wi-Fi Direct and Information buttons at the same time.
Press and hold the Resume button ( or ) for up to 10 seconds or until the report prints.
HP DeskJet 6000 and 6400, ENVY 6000, Pro 6400, and Tango printers: Touch and hold the Information button until all control panel buttons light up, and then touch the Information and Cancel buttons at the same time.
Make sure paper is loaded in the main tray, and then turn on the printer.
If you want to print web content, such as an email or cloud-based document, open the item before proceeding.
On your mobile device, open the Wi-Fi network menu, and then select your printer starting with DIRECT in the name and followed by the model name.
There might be multiple Wi-Fi Direct printers within range of your mobile device. Make sure to select the name of your printer in the list to prevent connection and print job issues.
If prompted, enter the Wi-Fi Direct password, and then tap Join.
Open the item you want to print, and then select the option to Print.
Select AirPrint, if prompted.
Select your printer, and then tap Print.
If you were previously connected to a Wi-Fi network, return to the Wi-Fi network menu to reconnect to the network.
While printing, open the Print Center app to view print job status and settings.
While the print job is in progress, open the Apps Switcher to view all apps that have recently been used.
iPhones and iPads with a Home button: Press the Home button twice.
iPhone X and iPad or later: Swipe up from the bottom to the middle of the screen and hold until the apps display.
Select Print Center to view the Print Summary.
If Print Center is not available, the app automatically closed after the print job completed.
Cancel print jobs from the printer control panel or with the Print Center on your Apple device.
From the printer control panel: Press the Cancel button .
From your Apple device: While the print job is in progress, open the Apps Switcher. For devices with a Home button:, press the Home button twice. For iPhone X and iPad or later, swipe up from the bottom to the middle of the screen and hold until the apps display. Select Print Center, and then tap Cancel Printing.