hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP Indigo Digital Press - Dripping in Series 3 Indigo Presses

Issue

When press is printing, different sizes of dripping dots are shown in the impression. Sometimes it is not only a dot, the user can see big amount of dripping along the impression.

Solution

In the series 3 presses, the draining mechanism of the bids catch tray is not so robust. The draining hole is stuck with bids residue producing a big amount of liquid in the catch tray.
When catch tray is totally full of liquid and cannot be drained, this residue is falling down between the walls of the press, going through the ILD support and falling down to the substrate.
Actions to be done:
  1. Check the level of catch tray.
  2. If full of residue, drain with a manual pump.
  3. Dismantle the drain mechanism and clean it.
  4. Clean the catch tray.

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Lithuania

hp-detect-load-my-device-portlet

Actions
Loading...