hp-support-head-portlet

Actions
Loading...
Soporte al cliente de HP: base de conocimientos

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Información
    Estamos actualizando nuestro sitio

    Si experimenta algún error durante este tiempo, inténtelo de nuevo más tarde.

    Información
    El soporte de Microsoft para Windows 7 finalizó el 14 de enero de 2020

    HP recomienda que comience el proceso de actualización para Windows 10 si su PC ha sido probado por HP. Para más información, haga clic aquí.

     

hp-concentra-wrapper-portlet

Actions
Loading...

Removing and Replacing the Battery for HP Pavilion g6-2000, g6-2100, g6-2200 and g6-2300 Notebook PCs

This document applies to HP Pavilion g6-2xxx series notebook computers.
HP Pavilion g6-2x00 series notebook computer

Before you begin

  • Turn off the computer. Disconnect the Ethernet or modem cable. Disconnect the power cord.
  • Transfer the computer to a clear, flat, stable work surface over a non-carpeted floor.
  • HP strongly recommends the use of an anti-static wrist strap and a conductive foam pad when working on the computer.
  • Do not remove a component from its protective packaging until you are ready to install it.
  advertencia:
The edges of metal panels can cut skin. Be careful not to slide skin along any interior metal edge of the computer.
  atención:
This product contains components that can be damaged by electrostatic discharge (ESD). To reduce the chance of ESD damage, work over a non-carpeted floor, use a static dissipative work surface (such as a conductive foam pad), and wear an ESD wrist strap connected to a grounded surface.

Video overview

View the following video before using the steps in this article.
nota:
The video and graphics in this article depict a specific configuration of notebook computer. These same removal and replacement procedures apply to all configurations for all HP Pavilion g6-2xxx Series PCs.

Removing the battery

  advertencia:
Make sure the computer is disconnected from power before starting.
Follow the steps in this section to remove the battery.
Step 1
On the bottom of the notebook, slide the battery release latch into the release position to partially eject the battery.
The release latch is identified by a battery icon.
Sliding the release latch
Step 2
Lift the front end of the battery and remove from the computer.
Removing the battery

Replacing the battery

Use the steps in this section to replace the battery.
Step 1
Toe the bottom outer edge of the battery into the battery bay.
Aligning the battery
Step 2
Press down on the inner edge of the battery until it clicks into place.
Pressing down on the battery

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
País/región: América Central

hp-detect-load-my-device-portlet

Actions
Loading...