hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information

    Fix and resolve Windows 10 update issue on HP Computer or Printer. Click here

    Information
    Create an HP account today!

     Connect with HP support faster, manage all of your devices in one place, view warranty information and more. Learn more​

hp-concentra-wrapper-portlet

Actions
Loading...

HP Designjet L26500 printer series - Printer specifications

Functional specifications

HP No. 792 ink supplies
Printheads
Yellow/black, cyan/light cyan and light magenta/magenta
Ink cartridges
Yellow, black, magenta, light magenta, cyan and light cyan. All cartridges contain 775 ml of ink.
Printhead cleaning kit
Non-color-specific
Ink tube assembly
Non-color-specific
Ink filter
Non-color-specific
Substrate sizes
Minimum
Maximum
Width
584 mm (23 in)
Narrow substrate: 254 mm (10 in)
1549 mm (61 in)
Length
1.5 m (59 in)
Roll with maximum external diameter of 180 mm (7.1 in)
Print resolutions
Ink level
Number of passes
Halftone resolutions (dpi)
Print resolutions (dpi)
100%
4–28 (except 18)
300, 600
1200×1200
18
1200
1200×1200
200%
10–28 (except 18)
300, 600
1200×1200
18
1200
1200×1200
The table above shows the resolutions supported by the printer. See your RIP documentation to find the resolutions supported by your RIP.
Margins
Side margins
5 mm
Top margin (leading edge)
5 mm
Bottom margin (trailing edge)
5 mm (none)
100 mm (small)
150 mm (normal)
200 mm (extra)
300 mm (extra)
400 mm (extra)
500 mm (extra)

Physical specifications

Printer physical specifications
Weight (including stand)
290.1 kg
Width
2465 mm
Depth
690 mm
Height
1370 mm

Memory specifications

Memory specifications
Memory (DRAM)
512 MB
Hard disk
160 GB

Power specifications

note:
An electrician is required for the setup and configuration of the building electrical system used to power the printer and also for printer installation. Make sure that your electrician is appropriately certified according to local regulations and supplied with all the information regarding the electrical configuration.
Your printer requires that the following electrical components be supplied and installed by the customer, according to the National Electrotechnical Code (NEC).
Single phase line specifications
Outside Japan
Japan only
Number of power cords
2
2
Input voltage
220-240 V~ (-10%+6%)
200V (-10%+10%)
Input frequency
50 / 60 Hz
50 / 60 Hz
Power consumption
4.8 kW (overall consumption for both power cords)
4.8 kW (overall consumption for both power cords)
Maximum load current (per power cord)
15 A
15 A

Environmental specifications

Printer environmental specifications
Relative humidity range for best print quality
20–80%, depending on substrate type
Temperature range for best print quality
18 to 25°C (64 to 77°F), depending on substrate type
Temperature range for printing
15 to 30°C (59 to 86°F)
Temperature range when not in operation
-25 to +55°C (-13 to +131°F)
Temperature gradient
no more than 10°C/h (18°F/h)
Maximum altitude when printing
3000 m (10000 ft)
note:
The printer must be kept indoors.
note:
If the printer or ink cartridges are moved from a cold location to a warm and humid location, water from the atmosphere can condensate on the printer parts and cartridges and can result in ink leaks and printer errors. In this case, HP recommends that you wait at least 3 hours before turning on the printer or installing the ink cartridges, to allow the condensate to evaporate.

Acoustic specifications

Printer acoustic specifications
Idle sound power
≤ 5.1 B (A)
Operating sound power
≤ 7.5 B (A)
Idle sound pressure
≤ 39 dB (A)
Operating sound pressure
≤ 56 dB (A)

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Caribbean

hp-detect-load-my-device-portlet

Actions
Loading...