If an optional analog fax accessory is installed in the device, and the device is connected to an analog phone line, you can use the device to send and receive faxes. If an analog fax accessory is not installed, you can send faxes by using a LAN fax service or an Internet fax service.
note:If an analog fax accessory is not installed, the device cannot receive faxes.
Use the HP MFP Send Fax driver to send faxes from a computer to one or more network-connected devices. Access the HP MFP Send Fax driver by printing from an application and selecting the appropriate driver in the Print dialog box:
-
HP CM8060 MFP with Edgeline Fax for the HP CM8060 Color MFP with Edgeline Technology
-
HP CM8050 MFP with Edgeline Fax for the HP CM8050 Color MFP with Edgeline Technology
Other settings for the driver are available by accessing the driver settings.
This STR describes the settings that are available for the HP MFP Send Fax driver. These settings are located on the control tabs, the controls, and the control dialog boxes that are displayed through the driver Properties tabs, the Printing Preferences tabs, the Printing Defaults tabs, and the Document Properties tabs.
Most of the tabs and settings available on these driver dialog boxes are standard Windows print settings and selections. Only the settings and selections specific to the HP MFP Send Fax driver are covered.
note:For information about sending faxes directly from the device control panel, see the HP CM8060/CM8050 Color MFP with Edgeline Technology System Administrator Guide, which is available on the System Administrator's CD.