HP ENVY 6200, 7100, 7800 Printers - Replacing Ink Cartridges

Примечание.

If you are enrolled in the HP Instant Ink program, you receive special HP Instant Ink cartridges. Some HP Instant Ink cartridges are larger than standard ink cartridges, but they fit in the carriage in the same way. HP Instant Ink is not available in all countries/regions or for all printer models. For more information, go to HP Instant Ink.

1. Standard ink cartridge
2. HP Instant Ink cartridge

1. Turn on the printer.
2. Load plain white paper in the input tray.
3. Open the ink cartridge access door.
   
4. Wait until the carriage is idle and silent before you continue.
5. Lightly press down on the ink cartridge to release it, and then pull the ink cartridge out of its slot.
   
6. Remove the new ink cartridge from its package. Be careful to only touch the black plastic on the ink cartridge.
   
7. Remove the plastic tape.

     Внимание!

   Do not touch the copper-colored contacts or the ink nozzles. Do not replace the protective tape on the contacts. Handling these parts can result in clogs, ink failure, and bad electrical connections.

   
8. Hold the ink cartridge by its sides with the contacts toward the printer, insert the ink cartridge into its slot, and then gently push the ink cartridge until it snaps into place.

   Примечание.

   Install the color ink cartridge on the left and the black ink cartridge on the right.

   
9. Repeat these steps to install the other ink cartridge, if necessary.
10. Close the ink cartridge access door.
    The printer starts an initialization process. It is normal for the printer to make noises during this process. After the process completes, the printer prints an alignment page.