Error:

В браузере отключена поддержка Javascript. Для этой страницы требуется поддержка Javascript. Включите поддержку Javascript в браузере. Инструкции приведены в документации к браузеру.

hp-support-head-portlet

Действия

Загрузка...

Служба поддержки клиентов HP - База знаний

hp-contact-secondary-navigation-portlet

Действия

Загрузка...

hp-share-print-widget-portlet

Действия

Загрузка...

Информация

Узнайте, как перейти на Windows 11
Руководство по обновлению Windows 11

Оставить отзыв

hp-concentra-wrapper-portlet

Действия

Загрузка...

Setting Up the Printer Hardware for HP LaserJet Pro CP1025 and CP1025nw Color Printers

Introduction

This document explains how to set up the physical parts of the product. Complete these steps before you install the product software on your computer.

This document includes the following steps to set up the product:

Check the contents of the box
Unpack the printer
Insert the input tray
Load plain paper
Connect the power cord
Turn on power

Set up the printer

Follow these steps in order.

Внимание!
Do NOT connect a USB cable now. If you plan to use a USB cable to connect the product to the computer, you will be prompted to connect it at the correct time during software installation.

Step one: Check the contents of the box

Remove the product and other items from the shipping box, and then check the contents.

The contents might vary by country/region. See the packaging for a list of items shipped in the box.

Step two: Unpack the printer

Remove all the orange shipping tape and the packaging material from outside the product.

Рис. : Remove packing tape
Recycle or discard the packaging materials.

Рис. : Recycle or discard the packaging materials
Raise the print cartridge door, and then remove and discard the two orange packing clips.

Рис. : Remove orange packing clips
Remove the instruction sheet.

Do not turn on the power or install the product software, yet.

Рис. : Remove the instruction sheet

Step three: Insert the input tray

Close the print cartridge door, and then remove the input tray from inside the product.

Рис. : Close the print cartridge door and remove the input tray
Remove the input tray from its packaging, and then flip the tray.

Рис. : Remove packaging and flip the tray
Insert the input tray, and then raise the output tray extender.

Рис. : Insert the input tray and raise the output tray extender

Step four: Load plain paper

Video of loading paper

The following video demonstrates how to load paper.

Slide the paper length and width guides to their outermost positions.
Load plain white paper in the input tray. Slide the paper forward until it stops.

Рис. : Load plain white paper

Примечание.
Do not overload the tray. Make sure that the stack of paper fits within the tray and is no higher than the top of the guides.
Slide the paper length and width guides inward until they stop at the edges of the paper.

Рис. : Slide paper guides inward

Step five: Connect the power cord

Connect the power cord to the back of the product, and then plug it into the wall outlet.

Рис. : Connect the power cord

Step six: Turn on power

Press the Power button (

) to turn on the product.

Рис. : Turn on power

Getting started with ePrint

Now you can stay connected and productive on the go with ePrint. ePrint lets you print directly to your ePrint-enabled HP printer using a smartphone, notebook, or other mobile device. For additional information related to setting up and using ePrint, click the link provided.