Error:

В браузере отключена поддержка Javascript. Для этой страницы требуется поддержка Javascript. Включите поддержку Javascript в браузере. Инструкции приведены в документации к браузеру.

hp-support-head-portlet

Действия

Загрузка...

Служба поддержки клиентов HP - База знаний

hp-contact-secondary-navigation-portlet

Действия

Загрузка...

hp-share-print-widget-portlet

Действия

Загрузка...

Информация

Узнайте, как перейти на Windows 11
Руководство по обновлению Windows 11

Оставить отзыв

hp-concentra-wrapper-portlet

Действия

Загрузка...

HP LaserJet 1020 and 1022 Printer Series - Setting Up the LaserJet (Hardware)

Introduction

This document explains how to set up the physical parts of the product. Complete these steps before you install the product software on your computer.

This document includes the following steps to set up the product:

Unpack the printer and check the contents
Remove the packing tape
Install the print cartridge
Connect the power cord
Turn on the product
Load plain paper

Setting up the printer

Follow these steps in order.

Step one: Unpack the printer and check the contents

Remove the product from the box.

Рис. : Remove the product from the box
Check the contents of the box.

The contents might vary by country/region. See the packaging for a list of items shipped in the box.

Step two: Remove the packing tape

Open the print cartridge access door.

Рис. : Open the print cartridge access door
Remove all the orange packing tape from the product.

Рис. : Remove the orange packing tape

Step three: Install the print cartridge

Open the output tray support, and then open the print cartridge door.

Рис. : Open the output tray support

Рис. : Open the print cartridge door
Remove the new print cartridge from the package.

Внимание!
Hold the print cartridge at each end to prevent damage to the print cartridge.

Рис. : Remove the new print cartridge from the package
Gently rock the print cartridge back and forth to distribute the toner evenly.

Рис. : Rock the print cartridge back and forth
Pull the orange tab until all the sealing tape is removed from the print cartridge. Put the tab in the print cartridge box to return for recycling.

Рис. : Pull the orange tab to remove the sealing tape
Insert the print cartridge in the product, and then close the print cartridge door.

Рис. : Insert the print cartridge

Step four: Connect the power cord

Connect the power cord to the back of the product, and then plug the power cord into an electrical outlet.

Рис. : Connect the power cord

Step five: Turn on power

Press the Power switch to turn on the product.

Рис. : Press the Power switch

Step six: Load plain paper

Slide the paper width and length guides to their outmost positions.

Рис. : Slide out the paper guides
Load the paper into the paper tray, and then slide the paper width and length guides inward until they stop at the edge of the paper.

Внимание!
Do not use stapled, wrinkled, folded, or damaged paper.

Рис. : Load the paper and slide in paper guides
Insert the input tray cover over the main input tray.

Рис. : Insert the input tray cover
Close the input tray.

Рис. : Close the input tray