HP Desktop PCs - motherboard specifications, Tampa
番号 : The Tampa motherboard
Motherboard description
HP name: Tampa
SSID: 8307
Form Factor
uATX
Dimensions: 24.0x24.0 cm (9.4x9.4 in)
Chipset
Z270
Processor upgrade information
TDP: up to 91 W
Socket type: LGA 1151
Motherboard supports the following processor upgrades:
Processor
TDP
Integrated Graphics
Intel Core i7-7700K (Kabylake) 4.2 GHz Quad Core
91 W
Integrated HD Graphics 630
Intel Core i7-7700 (Kabylake) 3.6 GHz Quad Core
65 W
Integrated HD Graphics 630
Intel Core i5-7600K (Kabylake) 3.8 GHz Quad Core
91 W
Integrated HD Graphics 630
Intel Core i5-7400 (Kabylake) 3.0 GHz Quad Core
65 W
Integrated HD Graphics 630
Memory upgrade information
Dual channel (2 DIMMs per channel) memory architecture
Four DDR4 UDIMM (288-pin) sockets
Supports PC4-19200 (DDR4-2400)
Supports 4 GB and 8 GB DDR4 UDIMMs
Supports up to 4 GB on 32-bit systems
補足:
32-bit systems cannot address a full 4.0 GB of memory.
Supports up to 32 GB (unbuffered) on 64-bit computers
補足:
Maximum memory shown reflects the capability of the hardware and can be limited further in the operating system.
Video
Integrated graphics
Integrated Intel HD Graphics
補足:
Integrated video is not available if a graphics card is installed.
Audio
Integrated audio
Audio Codec: ALC3863-CG
High Definition (Azalia) 5.1 channel audio support
補足:
The motherboard supports 5.1 surround sound. If the computer does not have the required audio jacks for a 5.1 configuration, additional hardware is required to use 5.1 surround sound.
Audio jack presence detection
補足:
An internal speaker is not included with integrated audio. External speakers or headphones are required to hear sound.
補足:
Integrated audio is not available if a sound card is installed.
Network
LAN: 1000BASE-T
Technology: Realtek RTL8161
Data transfer speeds: up to 10/100/1000 Mb/s
Transmission standards: 1000BASE-T Ethernet
Expansion Slots
Two PCI Express x16 physical slots (Gen 3.0), each slot with x8 bus lanes
One M.2 socket 1, key A
One M.2 socket 3, key M
I/O Ports and Jumpers
Back I/O ports
補足:
The configuration might vary depending on your model (for example, if a dedicated graphics card is included). Any modifications or upgrades might change the configuration, port accessibility, and port functionality.
番号 : Tampa back I/O panel
Optical SPDIF connector
DisplayPort
HDMI out
USB 2.0: 2
USB 3.0: 4
LAN (Ethernet)
Audio: Line in
Audio: Line out
Audio: Microphone
Jumpers
番号 : Clear CMOS and clear password jumpers in the default positions